Assorted spelling, case and grammar fixes.

dlls/ddraw/clipper.c

@@ -212,7 +212,7 @@ static HRESULT WINAPI IDirectDrawClipperImpl_GetClipList(
  *
  * Sets or deletes (if lprgn is NULL) the clip list
  *
- * This implementation is a stup and returns DD_OK always to make the app
+ * This implementation is a stub and returns DD_OK always to make the app
  * happy.
  *
  * PARAMS
@@ -265,7 +265,7 @@ static HRESULT WINAPI IDirectDrawClipperImpl_GetHWnd(
  *
  * Return values:
  *  DD_OK on success
- *  DDERR_ALREADYINITIALIZED if this interface isn't initialized allready
+ *  DDERR_ALREADYINITIALIZED if this interface isn't initialized already
  *****************************************************************************/
 static HRESULT WINAPI IDirectDrawClipperImpl_Initialize(
      LPDIRECTDRAWCLIPPER iface, LPDIRECTDRAW lpDD, DWORD dwFlags

dlls/ddraw/ddraw_private.h

@@ -98,7 +98,7 @@ struct IDirectDrawImpl
     IDirectDrawSurfaceImpl  *DepthStencilBuffer;
     BOOL                    d3d_initialized;
 
-    /* misc ddraw fields */
+    /* Misc ddraw fields */
     UINT                    total_vidmem;
     DWORD                   cur_scanline;
     BOOL                    fake_vblank;
@@ -121,7 +121,7 @@ struct IDirectDrawImpl
     IDirect3DDeviceImpl     *d3ddevice;
     int                     d3dversion;
 
-    /* Varios HWNDs */
+    /* Various HWNDs */
     HWND                    focuswindow;
     HWND                    devicewindow;
 
@@ -396,7 +396,7 @@ struct IDirectDrawPaletteImpl
 const IDirectDrawPaletteVtbl IDirectDrawPalette_Vtbl;
 
 /******************************************************************************
- * DirectDraw ClassFactory Implementation - incomplete
+ * DirectDraw ClassFactory implementation - incomplete
  ******************************************************************************/
 typedef struct
 {
@@ -470,7 +470,7 @@ struct IDirect3DMaterialImpl
     void (*activate)(IDirect3DMaterialImpl* this);
 };
 
-/* VTables in varios versions */
+/* VTables in various versions */
 const IDirect3DMaterialVtbl IDirect3DMaterial_Vtbl;
 const IDirect3DMaterial2Vtbl IDirect3DMaterial2_Vtbl;
 const IDirect3DMaterial3Vtbl IDirect3DMaterial3_Vtbl;

dlls/ddraw/direct3d.c

@@ -243,7 +243,7 @@ IDirect3DImpl_7_EnumDevices(IDirect3D7 *iface,
  * IDirect3D3::EnumDevices
  *
  * Enumerates all supported Direct3DDevice interfaces. This is the
- * implementation for Direct3D 1 to Direc3D 3, Version 7 has it's own.
+ * implementation for Direct3D 1 to Direc3D 3, Version 7 has its own.
  *
  * Version 1, 2 and 3
  *
@@ -425,7 +425,7 @@ Thunk_IDirect3DImpl_1_CreateLight(IDirect3D *iface,
  * IDirect3D3::CreateMaterial
  *
  * Creates an IDirect3DMaterial interface. This interface is used by Direct3D3
- * and older versions. The IDirect3DMaterial implementation wraps it's
+ * and older versions. The IDirect3DMaterial implementation wraps its
  * functionality to IDirect3DDevice7::SetMaterial and friends.
  *
  * Version 1, 2 and 3
@@ -521,7 +521,7 @@ Thunk_IDirect3DImpl_1_CreateMaterial(IDirect3D *iface,
  * by Direct3D and earlier versions for Viewport management. In Direct3D7
  * it has been replaced by a viewport structure and
  * IDirect3DDevice7::*Viewport. Wine's IDirect3DViewport implementation
- * uses the IDirect3DDevice7 methods for it's functionality
+ * uses the IDirect3DDevice7 methods for its functionality
  *
  * Params:
  *  Viewport: Address to store the new interface pointer
@@ -600,7 +600,7 @@ Thunk_IDirect3DImpl_1_CreateViewport(IDirect3D *iface,
  *
  * Verion 1, 2 and 3
  * Params:
- *  D3DDFS: Describes the requested device charakteristics
+ *  D3DDFS: Describes the requested device characteristics
  *  D3DFDR: Returns the device description
  *
  * Returns:
@@ -767,12 +767,12 @@ IDirect3DImpl_7_CreateDevice(IDirect3D7 *iface,
     IndexBufferParent->ref = 1;
 
     /* Create an Index Buffer. WineD3D needs one for Drawing indexed primitives
-     * Create a (hopefully) long enought buffer, and copy the indices into it
+     * Create a (hopefully) long enough buffer, and copy the indices into it
      * Ideally, a IWineD3DIndexBuffer::SetData method could be created, which
      * takes the pointer and avoids the memcpy
      */
     hr = IWineD3DDevice_CreateIndexBuffer(This->wineD3DDevice,
-                                          0x40000, /* Lenght. Don't know how long it should be */
+                                          0x40000, /* Length. Don't know how long it should be */
                                           0, /* Usage */
                                           WINED3DFMT_INDEX16, /* Format. D3D7 uses WORDS */
                                           WINED3DPOOL_DEFAULT,
@@ -832,7 +832,7 @@ IDirect3DImpl_7_CreateDevice(IDirect3D7 *iface,
     }
 
     /* AddRef the render target. Also AddRef the render target from ddraw,
-     * because if it released before the app releases the D3D device, the D3D capatiblities
+     * because if it is released before the app releases the D3D device, the D3D capabilities
      * of WineD3D will be uninitialized, which has bad effects.
      *
      * In most cases, those surfaces are the surfaces are the same anyway, but this will simply
@@ -919,7 +919,7 @@ IDirect3DImpl_7_CreateVertexBuffer(IDirect3D7 *iface,
     HRESULT hr;
     TRACE("(%p)->(%p,%p,%08lx)\n", This, Desc, VertexBuffer, Flags);
 
-    TRACE("(%p) Vertex buffer description: \n", This);
+    TRACE("(%p) Vertex buffer description:\n", This);
     TRACE("(%p)  dwSize=%ld\n", This, Desc->dwSize);
     TRACE("(%p)  dwCaps=%08lx\n", This, Desc->dwCaps);
     TRACE("(%p)  FVF=%08lx\n", This, Desc->dwFVF);
@@ -1081,7 +1081,7 @@ Thunk_IDirect3DImpl_3_EnumZBufferFormats(IDirect3D3 *iface,
 /*****************************************************************************
  * IDirect3D7::EvictManagedTextures
  *
- * Removes all managed textures(=surfaces with DDSCAPS2_TEXTUREMANAGE or
+ * Removes all managed textures (=surfaces with DDSCAPS2_TEXTUREMANAGE or
  * DDSCAPS2_D3DTEXTUREMANAGE caps) to be removed from video memory.
  *
  * Version 3 and 7
@@ -1121,8 +1121,8 @@ Thunk_IDirect3DImpl_3_EvictManagedTextures(IDirect3D3 *iface)
  *
  * Params:
  *  WineD3D: The interface to get the caps from
- *  Desc123: Old D3D <3 structure to fill(needed)
- *  Desc7: D3D7 device desc structure to fill(needed)
+ *  Desc123: Old D3D <3 structure to fill (needed)
+ *  Desc7: D3D7 device desc structure to fill (needed)
  *
  * Returns
  *  D3D_OK on success, or the return value of IWineD3D::GetCaps

dlls/ddraw/executebuffer.c

@@ -78,7 +78,7 @@ static void _dump_D3DEXECUTEBUFFERDESC(LPD3DEXECUTEBUFFERDESC lpDesc) {
  * for drawing the vertices. It is called from
  * IDirect3DDevice::Execute
  *
- * TODO: Perhaps some comments about the varios opcodes wouldn't hurt
+ * TODO: Perhaps some comments about the various opcodes wouldn't hurt
  *
  * Don't declare this static, as it's called from device.c,
  * IDirect3DDevice::Execute

dlls/ddraw/gamma.c

@@ -46,7 +46,7 @@ WINE_DEFAULT_DEBUG_CHANNEL(ddraw);
 WINE_DECLARE_DEBUG_CHANNEL(ddraw_thunk);
 
 /**********************************************************
- * IUnkown parts follow
+ * IUnknown parts follow
  **********************************************************/
 
 /**********************************************************

dlls/ddraw/main.c

@@ -71,7 +71,7 @@ WINED3DSURFTYPE DefaultSurfaceType = SURFACE_UNKNOWN;
  *  iid: requested version ID.
  *
  * Returns:
- *  DD_OK if the Interface was created sucessfully
+ *  DD_OK if the Interface was created successfully
  *  CLASS_E_NOAGGREGATION if UnkOuter is not NULL
  *  E_OUTOFMEMORY if some allocation failed
  *
@@ -111,7 +111,7 @@ DDRAW_Create(GUID *guid,
         devicetype = 0;
     }
 
-    /* DDraw doesn't support aggreation, according to msdn */
+    /* DDraw doesn't support aggregation, according to msdn */
     if (UnkOuter != NULL)
         return CLASS_E_NOAGGREGATION;
 
@@ -169,7 +169,7 @@ DDRAW_Create(GUID *guid,
     /* Initialized member...
      *
      * It is set to false at creation time, and set to true in
-     * IDirectDraw7::Initialize. It's sole purpose is to return DD_OK on
+     * IDirectDraw7::Initialize. Its sole purpose is to return DD_OK on
      * initialize only once
      */
     This->initialized = FALSE;
@@ -177,7 +177,7 @@ DDRAW_Create(GUID *guid,
     /* Initialize WineD3DDevice
      *
      * It is used for screen setup, surface and palette creation
-     * When a Direct3DDevice7 is created, the D3D capatiblities of WineD3D are
+     * When a Direct3DDevice7 is created, the D3D capabilities of WineD3D are
      * initialized
      */
     hr = IWineD3D_CreateDevice(wineD3D,

dlls/ddraw/surface.c

@@ -51,7 +51,7 @@
 WINE_DEFAULT_DEBUG_CHANNEL(ddraw);
 
 /*****************************************************************************
- * IUnkown parts follow
+ * IUnknown parts follow
  *****************************************************************************/
 
 /*****************************************************************************
@@ -172,7 +172,7 @@ IDirectDrawSurfaceImpl_AddRef(IDirectDrawSurface7 *iface)
  *
  * A helper function for IDirectDrawSurface7::Release
  *
- * Frees the surface, regardless of it's refcount.
+ * Frees the surface, regardless of its refcount.
  *  See IDirectDrawSurface7::Release for more information
  *
  * Params:
@@ -196,10 +196,10 @@ static void IDirectDrawSurfaceImpl_Destroy(IDirectDrawSurfaceImpl *This)
     /* Check for attached surfaces and detach them */
     if(This->first_attached != This)
     {
-        /* Well, this shouldn't happen: The surface beeing attached is addref()ed
+        /* Well, this shouldn't happen: The surface being attached is addref()ed
           * in AddAttachedSurface, so it shouldn't be released until DeleteAttachedSurface
-          * is called, because the refcount is hold. It looks like the app released()
-          * it often enought to force this
+          * is called, because the refcount is held. It looks like the app released()
+          * it often enough to force this
           */
         IDirectDrawSurface7 *root = ICOM_INTERFACE(This->first_attached, IDirectDrawSurface7);
         IDirectDrawSurface7 *detach = ICOM_INTERFACE(This, IDirectDrawSurface7);
@@ -262,16 +262,16 @@ static void IDirectDrawSurfaceImpl_Destroy(IDirectDrawSurfaceImpl *This)
  * It has a nice graph explaining the connection.
  *
  * What happens here is basically this:
- * When a surface is destroyed, it's WineD3DSurface is released,
+ * When a surface is destroyed, its WineD3DSurface is released,
  * and the refcount of the DirectDraw interface is reduced by 1. If it has
  * complex surfaces attached to it, then these surfaces are destroyed too,
- * regardless of their refcount. If any surface beeing destroyed has another
- * surface attached to it(with a "soft" attachment, not complex), then
+ * regardless of their refcount. If any surface being destroyed has another
+ * surface attached to it (with a "soft" attachment, not complex), then
  * this surface is detached with DeleteAttachedSurface.
  *
  * When the surface is a texture, the WineD3DTexture is released.
  * If the surface is the Direct3D render target, then the D3D
- * capatiblities of the WineD3DDevice are uninitialized, which causes the
+ * capabilities of the WineD3DDevice are uninitialized, which causes the
  * swapchain to be released.
  *
  * Returns:
@@ -394,7 +394,7 @@ IDirectDrawSurfaceImpl_Release(IDirectDrawSurface7 *iface)
 /*****************************************************************************
  * IDirectDrawSurface7::GetAttachedSurface
  *
- * Returns an attached surface with the requested caps. Surface attchment
+ * Returns an attached surface with the requested caps. Surface attachment
  * and complex surfaces are not clearly described by the MSDN or sdk,
  * so this method is tricky and likely to contain problems.
  * This implementation searches the complex chain first, then the
@@ -405,7 +405,7 @@ IDirectDrawSurfaceImpl_Release(IDirectDrawSurface7 *iface)
  * returned. The MSDN says that this method fails if more than one surface
  * matches the caps, but apparently this is incorrect.
  *
- * The found surface is AddRefed before it's returned.
+ * The found surface is AddRef-ed before it is returned.
  *
  * Params:
  *  Caps: Pointer to a DDCAPS2 structure describing the caps asked for
@@ -461,7 +461,7 @@ IDirectDrawSurfaceImpl_GetAttachedSurface(IDirectDrawSurface7 *iface,
              * that matches the capabilities requested."
              *
              * The mipmap demo of the DirectX7 sdk shows what to do here:
-             * aparently apps expect the first found surface to be returned.
+             * apparently apps expect the first found surface to be returned.
              */
 
             TRACE("(%p): Returning surface %p\n", This, surf);
@@ -493,7 +493,7 @@ IDirectDrawSurfaceImpl_GetAttachedSurface(IDirectDrawSurface7 *iface,
              * that matches the capabilities requested."
              *
              * The mipmap demo of the DirectX7 sdk shows what to do here:
-             * aparently apps expect the first found surface to be returned.
+             * apparently apps expect the first found surface to be returned.
              */
 
             TRACE("(%p): Returning surface %p\n", This, surf);
@@ -526,7 +526,7 @@ IDirectDrawSurfaceImpl_GetAttachedSurface(IDirectDrawSurface7 *iface,
 /*****************************************************************************
  * IDirectDrawSurface7::Lock
  *
- * Locks the surface and returnes a pointer to the surface's memory
+ * Locks the surface and returns a pointer to the surface's memory
  *
  * Params:
  *  Rect: Rectangle to lock. If NULL, the whole surface is locked
@@ -716,18 +716,18 @@ IDirectDrawSurfaceImpl_Blt(IDirectDrawSurface7 *iface,
 /*****************************************************************************
  * IDirectDrawSurface7::AddAttachedSurface
  *
- * Attaches an surface to another surface. Surface attachments are
+ * Attaches a surface to another surface. Surface attachments are
  * incorrectly described in the SDK and the MSDN, and this method
- * is prone to bugs. The surface that is attached is AddRefed.
+ * is prone to bugs. The surface that is attached is AddRef-ed.
  *
- * The attachment list consists of a first surface(first_attached) and
+ * The attachment list consists of a first surface (first_attached) and
  * for each surface a pointer to the next attached surface (next_attached).
  * For the first surface, and a surface that has no attachments
  * first_attached points to the surface itself. A surface that has
  * no successors in the chain has next_attached set to NULL.
  *
  * Newly attached surfaces are attached right after the root surface. The
- * complex chains are handled seperately in a simmilar chain, with
+ * complex chains are handled separately in a similar chain, with
  * first_complex and next_complex. If a surface is attached to a complex
  * surface compound, it's attached to the surface that the app requested,
  * not the complex root. See GetAttachedSurface for a description
@@ -833,7 +833,7 @@ IDirectDrawSurfaceImpl_DeleteAttachedSurface(IDirectDrawSurface7 *iface,
          * and all parent surfaces */
     }
 
-    /* Find the Precessor of the detached surface */
+    /* Find the predecessor of the detached surface */
     while(Prev)
     {
         if(Prev->next_attached == Surf) break;
@@ -1046,7 +1046,7 @@ IDirectDrawSurfaceImpl_SetPrivateData(IDirectDrawSurface7 *iface,
 /*****************************************************************************
  * IDirectDrawSurface7::GetPrivateData
  *
- * Returnes the private data set with IDirectDrawSurface7::SetPrivateData
+ * Returns the private data set with IDirectDrawSurface7::SetPrivateData
  *
  * Params:
  *  tag: GUID of the data to return
@@ -1080,7 +1080,7 @@ IDirectDrawSurfaceImpl_GetPrivateData(IDirectDrawSurface7 *iface,
 /*****************************************************************************
  * IDirectDrawSurface7::FreePrivateData
  *
- * Frees private stored in the surface
+ * Frees private data stored in the surface
  *
  * Params:
  *  tag: Tag of the data to free
@@ -1645,7 +1645,7 @@ static HRESULT WINAPI IDirectDrawSurfaceImpl_ChangeUniquenessValue(IDirectDrawSu
     volatile IDirectDrawSurfaceImpl* vThis = This;
 
     TRACE("(%p)\n",This);
-    /* A uniquness value of 0 is apparently special.
+    /* A uniqueness value of 0 is apparently special.
     * This needs to be checked. */
     while (1) {
         DWORD old_uniqueness_value = vThis->uniqueness_value;

dlls/ddraw/tests/d3d.c

@@ -33,7 +33,7 @@ static LPDIRECT3DVERTEXBUFFER7 lpVBufDest1 = NULL;
 static LPDIRECT3DVERTEXBUFFER7 lpVBufDest2 = NULL;
 
 /* To compare bad floating point numbers. Not the ideal way to do it,
- * but it should be enought for here */
+ * but it should be enough for here */
 #define comparefloat(a, b) ( ((a - b) < 0.0001) && ((a-b) > -0.0001) )
 
 static HRESULT (WINAPI *pDirectDrawCreateEx)(LPGUID,LPVOID*,REFIID,LPUNKNOWN);

dlls/ddraw/utils.c

@@ -467,7 +467,7 @@ PixelFormat_DD2WineD3D(DDPIXELFORMAT *DDPixelFormat)
                 case 8:
                     if(DDPixelFormat->u1.dwAlphaBitDepth == 8)
                         return WINED3DFMT_A8L8;
-                    ERR("Unkown Alpha / Lumincase bit depth combination\n");
+                    ERR("Unknown Alpha / Lumincase bit depth combination\n");
                     return WINED3DFMT_UNKNOWN;
             }
         }
@@ -484,7 +484,7 @@ PixelFormat_DD2WineD3D(DDPIXELFORMAT *DDPixelFormat)
                     return WINED3DFMT_L8;
 
                 default:
-                    ERR("Unkown luminance-only bit depth 0x%lx\n", DDPixelFormat->u1.dwLuminanceBitCount);
+                    ERR("Unknown luminance-only bit depth 0x%lx\n", DDPixelFormat->u1.dwLuminanceBitCount);
                     return WINED3DFMT_UNKNOWN;
              }
         }
@@ -497,7 +497,7 @@ PixelFormat_DD2WineD3D(DDPIXELFORMAT *DDPixelFormat)
             switch(DDPixelFormat->u1.dwZBufferBitDepth)
             {
                 case 8:
-                    ERR("8 Bits Z+Stencil buffer pixelformat is not supported. Returning WINED3DFMT_UNKOWN\n");
+                    ERR("8 Bits Z+Stencil buffer pixelformat is not supported. Returning WINED3DFMT_UNKNOWN\n");
                     return WINED3DFMT_UNKNOWN;
 
                 case 15:
@@ -519,7 +519,7 @@ PixelFormat_DD2WineD3D(DDPIXELFORMAT *DDPixelFormat)
                         return WINED3DFMT_D24X4S4;
 
                 default:
-                    ERR("Unkown Z buffer depth %ld\n", DDPixelFormat->u1.dwZBufferBitDepth);
+                    ERR("Unknown Z buffer depth %ld\n", DDPixelFormat->u1.dwZBufferBitDepth);
                     return WINED3DFMT_UNKNOWN;
             }
         }
@@ -1123,7 +1123,7 @@ void DDRAW_dump_DDCAPS(const DDCAPS *lpcaps)
  * Params:
  *  dest: Pointer to the destination matrix
  *  src1: Pointer to the first source matrix
- *  src2: Pointer to the secound source matrix
+ *  src2: Pointer to the second source matrix
  *
  *****************************************************************************/
 void

dlls/ddraw/vertexbuffer.c

@@ -188,8 +188,8 @@ Thunk_IDirect3DVertexBufferImpl_1_Release(IDirect3DVertexBuffer *iface)
  * IDirect3DVertexBuffer7::Lock
  *
  * Locks the vertex buffer and returns a pointer to the vertex data
- * Locking vertex buffers is simmilar to locking surfaces, because Windows
- * uses surfaces to store vertex data internally(According to the DX sdk)
+ * Locking vertex buffers is similar to locking surfaces, because Windows
+ * uses surfaces to store vertex data internally (According to the DX sdk)
  *
  * Params:
  *  Flags: Locking flags. Relevant here are DDLOCK_READONLY, DDLOCK_WRITEONLY,

dlls/ddraw/viewport.c

@@ -676,7 +676,7 @@ IDirect3DViewportImpl_NextLight(IDirect3DViewport3 *iface,
  * IDirect3DViewport3::GetViewport2
  *
  * Returns the currently set viewport in a D3DVIEWPORT2 structure.
- * Simmilar to IDirect3DViewport3::GetViewport
+ * Similar to IDirect3DViewport3::GetViewport
  *
  * Params:
  *  lpData: Pointer to the structure to fill

dlls/shell32/shlfolder.c

@@ -189,7 +189,7 @@ HRESULT SHELL32_ParseNextElement (IShellFolder2 * psf, HWND hwndOwner, LPBC pbc,
  * via IPersistFolder3 or IPersistFolder.
  *
  * NOTES
- *   pathRoot can be NULL for Folders beeing a drive.
+ *   pathRoot can be NULL for Folders being a drive.
  *   In this case the absolute path is built from pidlChild (eg. C:)
  */
 static HRESULT SHELL32_CoCreateInitSF (LPCITEMIDLIST pidlRoot, LPCWSTR pathRoot,

dlls/wined3d/device.c

@@ -5184,7 +5184,7 @@ process_vertices_strided(IWineD3DDeviceImpl *This, DWORD dwDestIndex, DWORD dwCo
                 x  /= 2;
                 y  /= 2;
 
-                /* Msdn mentiones that Direct3D9 keeps a list of clipped vertices
+                /* Msdn mentions that Direct3D9 keeps a list of clipped vertices
                  * outside of the main vertex buffer memory. That needs some more
                  * investigation...
                  */

dlls/wined3d/stateblock.c

@@ -89,7 +89,7 @@ static ULONG  WINAPI IWineD3DStateBlockImpl_Release(IWineD3DStateBlock *iface) {
                 IWineD3DVertexDeclaration_Release(This->vertexDecl);
             }
 
-            /* NOTE: according to MSDN: The applicaion is responsible for making sure the texture references are cleared down */
+            /* NOTE: according to MSDN: The application is responsible for making sure the texture references are cleared down */
             for (counter = 0; counter < GL_LIMITS(textures); counter++) {
                 if (This->textures[counter]) {
                     /* release our 'internal' hold on the texture */

dlls/wined3d/surface_gdi.c

@@ -438,7 +438,7 @@ _Blt_ColorFill(BYTE *buf,
 /*****************************************************************************
  * IWineD3DSurface::Blt, GDI version
  *
- * Performs blits to a surface, eighter from a source of source-less blts
+ * Performs blits to a surface, eigher from a source of source-less blts
  * This is the main functionality of DirectDraw
  *
  * Params:

dlls/wined3d/utils.c

@@ -2086,7 +2086,7 @@ BOOL CalculateTexRect(IWineD3DSurfaceImpl *This, RECT *Rect, float glTexCoord[4]
         Rect->top -= This->glRect.top;
         Rect->bottom -= This->glRect.top;
 
-        /* Get the gl coordinates. The gl rectangle is a power of 2, eighter the max size,
+        /* Get the gl coordinates. The gl rectangle is a power of 2, eigher the max size,
          * or the pow2Width / pow2Height of the surface
          */
         glTexCoord[0] = (float) Rect->left / (float) (This->glRect.right - This->glRect.left);

programs/winefile/resource.h

@@ -25,7 +25,7 @@
 #define IDI_WINEFILE                    100
 
 
-/* accellerators and menus */
+/* accelerators and menus */
 
 #define IDA_WINEFILE                    101
 #define IDM_WINEFILE                    102