Commit 207e1c18 authored by Andreas Mohr's avatar Andreas Mohr Committed by Alexandre Julliard

Updated printing documentation a bit.

parent 47a99e1a
......@@ -17,14 +17,14 @@
</para>
<orderedlist>
<listitem>
<para>Use an external windows 3.1 printer driver.</para>
</listitem>
<listitem>
<para>
Use the builtin Wine Postscript driver (+ ghostscript to produce
output for non-postscript printers).
Use the builtin Wine PostScript driver (+ ghostscript to produce
output for non-PostScript printers).
</para>
</listitem>
<listitem>
<para>Use an external windows 3.1 printer driver (outdated, probably won't get supported any more).</para>
</listitem>
</orderedlist>
<para>
......@@ -34,7 +34,23 @@
</para>
<sect3>
<title>External printer drivers</title>
<title>Builtin Wine PostScript driver</title>
<para>
Enables printing of PostScript files via a driver built into Wine. See
below for installation instructions. The code for the PostScript
driver is in <filename>dlls/wineps/</filename>.
</para>
<para>
The driver behaves as if it were a DRV file called
<filename>wineps.drv</filename> which at the moment is built into
Wine.
Although it mimics a 16 bit driver, it will work with both 16 and 32
bit apps, just as win9x drivers do.
</para>
</sect3>
<sect3>
<title>External printer drivers (non-working as of Jul 8, 01)</title>
<para>
At present only 16 bit drivers will work (note that these include
win9x drivers). To use them, add
......@@ -58,22 +74,6 @@ printer=on
</sect3>
<sect3>
<title>Builtin Wine PostScript driver</title>
<para>
Enables printing of PostScript files via a driver built into Wine. See
below for installation instructions. The code for the PostScript
driver is in <filename>dlls/wineps/</filename>.
</para>
<para>
The driver behaves as if it were a DRV file called
<filename>wineps.drv</filename> which at the moment is built into
Wine.
Although it mimics a 16 bit driver it will work with both 16 and 32
bit apps, just as win9x drivers do.
</para>
</sect3>
<sect3>
<title>Spooling</title>
<para>
Spooling is rather primitive. The [spooler] section of
......@@ -82,13 +82,14 @@ printer=on
example the following lines
</para>
<screen>
"LPT1:" = "foo.ps" "LPT2:" = "|lpr"
"LPT1:" = "foo.ps"
"LPT2:" = "|lpr"
</screen>
<para>
map <systemitem>LPT1:</systemitem> to file <filename>foo.ps</filename>
and <systemitem>LPT2:</systemitem> to the <command>lpr</command>
command. If a job is sent to an unlisted port then a file is created
with that port's name e.g. for <systemitem>LPT3:</systemitem> a file
command. If a job is sent to an unlisted port, then a file is created
with that port's name; e.g. for <systemitem>LPT3:</systemitem> a file
called <systemitem>LPT3:</systemitem> would be created.
</para>
<para>
......@@ -114,7 +115,7 @@ printer=on
<para>
This allows Wine to generate PostScript files without
needing an external printer driver. Wine in this case uses the
system provided postscript printer filters, which almost all use
system provided PostScript printer filters, which almost all use
ghostscript if necessary. Those should be configured during the
original system installation or by your system administrator.
</para>
......@@ -124,7 +125,7 @@ printer=on
<sect4>
<title>Installation of CUPS printers</title>
<para>
If you are using CUPS you do not need to configure .ini or
If you are using CUPS, you do not need to configure .ini or
registry entries, everything is autodetected.
</para>
</sect4>
......@@ -143,36 +144,36 @@ printer=on
Since WINE cannot find out what type of printer this is, you
need to specify a PPD file in the [ppd] section of
<filename>~/.wine/config</filename>. Either use the shortcut
name and make the entry look:
name and make the entry look like:
</para>
<screen>
[ppd]
"ps1" = "/usr/lib/wine/ps1.ppd"
</screen>
<para>
Or you can specify a generic PPD file matching for all of the rest
printers. A generic PPD file can be found in
<filename>documenation/samples/generic.ppd</filename>.
Or you can specify a generic PPD file that is to match for all
of the remaining printers. A generic PPD file can be found in
<filename>documentation/samples/generic.ppd</filename>.
</para>
</sect4>
<sect4>
<title>Installation of other printers</title>
<para>
You do not need to this, if the above 2 sections apply, only if
You do not need to do this if the above 2 sections apply, only if
you have a special printer.
</para>
<screen>
"Wine PostScript Driver" = "WINEPS,LPT1:"
Wine PostScript Driver=WINEPS,LPT1:
</screen>
<para>
to the [devices] section and
</para>
<screen>
"Wine PostScript Driver" = "WINEPS,LPT1:,15,45"
Wine PostScript Driver=WINEPS,LPT1:,15,45
</screen>
<para>
to the [PrinterPorts] section of <filename>win.ini</filename> and to set it
as the default printer also add
to the [PrinterPorts] section of <filename>win.ini</filename>,
and to set it as the default printer also add
</para>
<screen>
"device" = "Wine PostScript Driver,WINEPS,LPT1:"
......@@ -182,8 +183,8 @@ printer=on
<emphasis>[sic]</emphasis>
</para>
<para>
You also need to add certain entries to the registry. The easiest way
to do this is to customise the contents of
You also need to add certain entries to the registry.
The easiest way to do this is to customise the contents of
<filename>documentation/psdrv.reg</filename> (see below) and use the
Winelib program <command>programs/regapi/regapi</command>. For
example, if you have installed the Wine source tree in
......@@ -214,52 +215,16 @@ printer=on
</para>
</sect4>
<sect4>
<title>Required Configuration for all printertypes</title>
<para>
You will need Adobe Font Metric (AFM) files for the (type 1 PostScript)
fonts that you wish to use. You can get these from
<ulink url="ftp://ftp.adobe.com/pub/adobe/type/win/all/afmfiles">
ftp://ftp.adobe.com/pub/adobe/type/win/all/afmfiles </ulink>. The
directories <filename>base17</filename> or <filename>base35</filename>
are good places to start. Note that these are only the font metrics and
not the fonts themselves. At the moment the driver does not download
additional fonts, so you can only use fonts that are already present on
the printer. (Actually, the driver can use any font that is listed in
the PPD file, for which it has an AFM file. If you use fonts that are
<emphasis>not</emphasis> installed in your printer, or in
Ghostscript, you will need to use some means of embedding the font in
the print job or downloading the font to the printer. Note also that
the driver does not yet properly list required fonts in its DSC
comments, so a print manager that depends on these comments to
download the proper fonts to the printer may not work properly.)
</para>
<title>Required configuration for all printer types</title>
<para>
Then create a [afmdirs] section in your
<filename>wine.conf</filename> (or
<filename>~/.wine/config</filename>) and add a line of the form
You won't need Adobe Font Metric (AFM) files for the (type 1 PostScript)
fonts that you wish to use any more.
Wine now has this information builtin.
</para>
<screen>
"dir&lt;n&gt;" = "/unix/path/name/"
</screen>
<para>
for each directory that contains AFM files you wish to use.
</para>
<para>
There usually are a lot of afm files already on your system,
within ghostscript, enscript, a2ps or similar programs. You might
check (and probably add) the following entries to the [afmdirs]
section.
</para>
<screen>
"1" = "/usr/share/ghostscript/fonts"
"2" = "/usr/share/a2ps/afm"
"3" = "/usr/share/enscript"
"4" = "/usr/X11R6/lib/X11/fonts/Type1"
</screen>
<para>
You also require a PPD file for your printer. This describes
You'll need a PPD file for your printer. This describes
certain characteristics of the printer such as which fonts are
installed, how to select manual feed etc. Adobe also has many of
installed, how to select manual feed etc. Adobe has many of
these on its website, have a look in
<ulink url="ftp://ftp.adobe.com/pub/adobe/printerdrivers/win/all/">
ftp://ftp.adobe.com/pub/adobe/printerdrivers/win/all/</ulink>.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment