Skip to content

W
wine-winehq
Commit 73a8c068 authored by Alexandre Julliard's avatar Alexandre Julliard
Browse files
Options

jpeg: Import upstream release 9f.

parent 1e5cc509
Hide whitespace changes
Inline Side-by-side
Showing with 312 additions and 238 deletions
libs/jpeg/jccoefct.c
View file @ 73a8c068
......@@ -2,7 +2,7 @@
* jccoefct.c
*
* Copyright (C) 1994-1997, Thomas G. Lane.
* Modified 2003-2020 by Guido Vollbeding.
* Modified 2003-2022 by Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
......@@ -41,9 +41,9 @@ typedef struct {
int MCU_rows_per_iMCU_row; /* number of such rows needed */
/* For single-pass compression, it's sufficient to buffer just one MCU
* (although this may prove a bit slow in practice). We append a
* workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it
* for each MCU constructed and sent.
* (although this may prove a bit slow in practice).
* We append a workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks,
* and reuse it for each MCU constructed and sent.
* In multi-pass modes, this array points to the current MCU's blocks
* within the virtual arrays.
*/
......
libs/jpeg/jccolor.c
View file @ 73a8c068
......@@ -2,7 +2,7 @@
* jccolor.c
*
* Copyright (C) 1991-1996, Thomas G. Lane.
* Modified 2011-2019 by Guido Vollbeding.
* Modified 2011-2023 by Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
......@@ -40,10 +40,10 @@ typedef my_color_converter * my_cconvert_ptr;
* Note that the derived conversion coefficients given in some of these
* documents are imprecise. The general conversion equations are
* Y = Kr * R + (1 - Kr - Kb) * G + Kb * B
* Cb = 0.5 * (B - Y) / (1 - Kb)
* Cr = 0.5 * (R - Y) / (1 - Kr)
* Cb = (B - Y) / (1 - Kb) / K
* Cr = (R - Y) / (1 - Kr) / K
* With Kr = 0.299 and Kb = 0.114 (derived according to SMPTE RP 177-1993
* from the 1953 FCC NTSC primaries and CIE Illuminant C),
* from the 1953 FCC NTSC primaries and CIE Illuminant C), K = 2 for sYCC,
* the conversion equations to be implemented are therefore
* Y = 0.299 * R + 0.587 * G + 0.114 * B
* Cb = -0.168735892 * R - 0.331264108 * G + 0.5 * B + CENTERJSAMPLE
......@@ -62,8 +62,8 @@ typedef my_color_converter * my_cconvert_ptr;
* by precalculating the constants times R,G,B for all possible values.
* For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
* for 9-bit to 12-bit samples it is still acceptable. It's not very
* reasonable for 16-bit samples, but if you want lossless storage you
* shouldn't be changing colorspace anyway.
* reasonable for 16-bit samples, but if you want lossless storage
* you shouldn't be changing colorspace anyway.
* The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included
* in the tables to save adding them separately in the inner loop.
*/
......@@ -110,16 +110,16 @@ rgb_ycc_start (j_compress_ptr cinfo)
for (i = 0; i <= MAXJSAMPLE; i++) {
rgb_ycc_tab[i+R_Y_OFF] = FIX(0.299) * i;
rgb_ycc_tab[i+G_Y_OFF] = FIX(0.587) * i;
rgb_ycc_tab[i+B_Y_OFF] = FIX(0.114) * i + ONE_HALF;
rgb_ycc_tab[i+B_Y_OFF] = FIX(0.114) * i + ONE_HALF;
rgb_ycc_tab[i+R_CB_OFF] = (- FIX(0.168735892)) * i;
rgb_ycc_tab[i+G_CB_OFF] = (- FIX(0.331264108)) * i;
/* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr.
* This ensures that the maximum output will round to MAXJSAMPLE
* not MAXJSAMPLE+1, and thus that we don't have to range-limit.
*/
rgb_ycc_tab[i+B_CB_OFF] = FIX(0.5) * i + CBCR_OFFSET + ONE_HALF-1;
rgb_ycc_tab[i+B_CB_OFF] = (i << (SCALEBITS-1)) + CBCR_OFFSET + ONE_HALF-1;
/* B=>Cb and R=>Cr tables are the same
rgb_ycc_tab[i+R_CR_OFF] = FIX(0.5) * i + CBCR_OFFSET + ONE_HALF-1;
rgb_ycc_tab[i+R_CR_OFF] = (i << (SCALEBITS-1)) + CBCR_OFFSET + ONE_HALF-1;
*/
rgb_ycc_tab[i+G_CR_OFF] = (- FIX(0.418687589)) * i;
rgb_ycc_tab[i+B_CR_OFF] = (- FIX(0.081312411)) * i;
......@@ -190,8 +190,8 @@ rgb_ycc_convert (j_compress_ptr cinfo,
/*
* Convert some rows of samples to the JPEG colorspace.
* This version handles RGB->grayscale conversion, which is the same
* as the RGB->Y portion of RGB->YCbCr.
* This version handles RGB->grayscale conversion,
* which is the same as the RGB->Y portion of RGB->YCbCr.
* We assume rgb_ycc_start has been called (we only use the Y tables).
*/
......@@ -201,7 +201,7 @@ rgb_gray_convert (j_compress_ptr cinfo,
JDIMENSION output_row, int num_rows)
{
my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
register int r, g, b;
register INT32 y;
register INT32 * ctab = cconvert->rgb_ycc_tab;
register JSAMPROW inptr;
register JSAMPROW outptr;
......@@ -212,14 +212,11 @@ rgb_gray_convert (j_compress_ptr cinfo,
inptr = *input_buf++;
outptr = output_buf[0][output_row++];
for (col = 0; col < num_cols; col++) {
r = GETJSAMPLE(inptr[RGB_RED]);
g = GETJSAMPLE(inptr[RGB_GREEN]);
b = GETJSAMPLE(inptr[RGB_BLUE]);
y = ctab[R_Y_OFF + GETJSAMPLE(inptr[RGB_RED])];
y += ctab[G_Y_OFF + GETJSAMPLE(inptr[RGB_GREEN])];
y += ctab[B_Y_OFF + GETJSAMPLE(inptr[RGB_BLUE])];
inptr += RGB_PIXELSIZE;
/* Y */
outptr[col] = (JSAMPLE)
((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
>> SCALEBITS);
outptr[col] = (JSAMPLE) (y >> SCALEBITS);
}
}
}
......
libs/jpeg/jchuff.c
View file @ 73a8c068
......@@ -2,7 +2,7 @@
* jchuff.c
*
* Copyright (C) 1991-1997, Thomas G. Lane.
* Modified 2006-2020 by Guido Vollbeding.
* Modified 2006-2023 by Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
......@@ -26,17 +26,11 @@
/* The legal range of a DCT coefficient is
* -1024 .. +1023 for 8-bit data;
* -16384 .. +16383 for 12-bit data.
* Hence the magnitude should always fit in 10 or 14 bits respectively.
* -1024 .. +1023 for 8-bit sample data precision;
* -16384 .. +16383 for 12-bit sample data precision.
* Hence the magnitude should always fit in sample data precision + 2 bits.
*/
#if BITS_IN_JSAMPLE == 8
#define MAX_COEF_BITS 10
#else
#define MAX_COEF_BITS 14
#endif
/* Derived data constructed for each Huffman table */
typedef struct {
......@@ -547,6 +541,7 @@ encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKARRAY MCU_data)
huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
register int temp, temp2;
register int nbits;
int max_coef_bits;
int blkn, ci, tbl;
ISHIFT_TEMPS
......@@ -558,6 +553,9 @@ encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKARRAY MCU_data)
if (entropy->restarts_to_go == 0)
emit_restart_e(entropy, entropy->next_restart_num);
/* Since we're encoding a difference, the range limit is twice as much. */
max_coef_bits = cinfo->data_precision + 3;
/* Encode the MCU data blocks */
for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
ci = cinfo->MCU_membership[blkn];
......@@ -569,12 +567,17 @@ encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKARRAY MCU_data)
temp = IRIGHT_SHIFT((int) (MCU_data[blkn][0][0]), cinfo->Al);
/* DC differences are figured on the point-transformed values. */
temp2 = temp - entropy->saved.last_dc_val[ci];
if ((temp2 = temp - entropy->saved.last_dc_val[ci]) == 0) {
/* Count/emit the Huffman-coded symbol for the number of bits */
emit_dc_symbol(entropy, tbl, 0);
continue;
}
entropy->saved.last_dc_val[ci] = temp;
/* Encode the DC coefficient difference per section G.1.2.1 */
temp = temp2;
if (temp < 0) {
if ((temp = temp2) < 0) {
temp = -temp; /* temp is abs value of input */
/* For a negative input, want temp2 = bitwise complement of abs(input) */
/* This code assumes we are on a two's complement machine */
......@@ -583,14 +586,10 @@ encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKARRAY MCU_data)
/* Find the number of bits needed for the magnitude of the coefficient */
nbits = 0;
while (temp) {
nbits++;
temp >>= 1;
}
/* Check for out-of-range coefficient values.
* Since we're encoding a difference, the range limit is twice as much.
*/
if (nbits > MAX_COEF_BITS+1)
do nbits++; /* there must be at least one 1 bit */
while ((temp >>= 1));
/* Check for out-of-range coefficient values */
if (nbits > max_coef_bits)
ERREXIT(cinfo, JERR_BAD_DCT_COEF);
/* Count/emit the Huffman-coded symbol for the number of bits */
......@@ -598,8 +597,7 @@ encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKARRAY MCU_data)
/* Emit that number of bits of the value, if positive, */
/* or the complement of its magnitude, if negative. */
if (nbits) /* emit_bits rejects calls with size 0 */
emit_bits_e(entropy, (unsigned int) temp2, nbits);
emit_bits_e(entropy, (unsigned int) temp2, nbits);
}
cinfo->dest->next_output_byte = entropy->next_output_byte;
......@@ -633,7 +631,7 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKARRAY MCU_data)
register int temp, temp2;
register int nbits;
register int r, k;
int Se, Al;
int Se, Al, max_coef_bits;
entropy->next_output_byte = cinfo->dest->next_output_byte;
entropy->free_in_buffer = cinfo->dest->free_in_buffer;
......@@ -646,6 +644,7 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKARRAY MCU_data)
Se = cinfo->Se;
Al = cinfo->Al;
natural_order = cinfo->natural_order;
max_coef_bits = cinfo->data_precision + 2;
/* Encode the MCU data block */
block = MCU_data[0];
......@@ -666,18 +665,23 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKARRAY MCU_data)
*/
if (temp < 0) {
temp = -temp; /* temp is abs value of input */
temp >>= Al; /* apply the point transform */
/* Apply the point transform, and watch out for case */
/* that nonzero coef is zero after point transform. */
if ((temp >>= Al) == 0) {
r++;
continue;
}
/* For a negative coef, want temp2 = bitwise complement of abs(coef) */
temp2 = ~temp;
} else {
temp >>= Al; /* apply the point transform */
/* Apply the point transform, and watch out for case */
/* that nonzero coef is zero after point transform. */
if ((temp >>= Al) == 0) {
r++;
continue;
}
temp2 = temp;
}
/* Watch out for case that nonzero coef is zero after point transform */
if (temp == 0) {
r++;
continue;
}
/* Emit any pending EOBRUN */
if (entropy->EOBRUN > 0)
......@@ -689,11 +693,11 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKARRAY MCU_data)
}
/* Find the number of bits needed for the magnitude of the coefficient */
nbits = 1; /* there must be at least one 1 bit */
while ((temp >>= 1))
nbits++;
nbits = 0;
do nbits++; /* there must be at least one 1 bit */
while ((temp >>= 1));
/* Check for out-of-range coefficient values */
if (nbits > MAX_COEF_BITS)
if (nbits > max_coef_bits)
ERREXIT(cinfo, JERR_BAD_DCT_COEF);
/* Count/emit Huffman symbol for run length / number of bits */
......@@ -916,83 +920,89 @@ encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val,
register int nbits;
register int r, k;
int Se = state->cinfo->lim_Se;
int max_coef_bits = state->cinfo->data_precision + 3;
const int * natural_order = state->cinfo->natural_order;
/* Encode the DC coefficient difference per section F.1.2.1 */
temp = temp2 = block[0] - last_dc_val;
if (temp < 0) {
temp = -temp; /* temp is abs value of input */
/* For a negative input, want temp2 = bitwise complement of abs(input) */
/* This code assumes we are on a two's complement machine */
temp2--;
}
if ((temp = block[0] - last_dc_val) == 0) {
/* Emit the Huffman-coded symbol for the number of bits */
if (! emit_bits_s(state, dctbl->ehufco[0], dctbl->ehufsi[0]))
return FALSE;
} else {
if ((temp2 = temp) < 0) {
temp = -temp; /* temp is abs value of input */
/* For a negative input, want temp2 = bitwise complement of abs(input) */
/* This code assumes we are on a two's complement machine */
temp2--;
}
/* Find the number of bits needed for the magnitude of the coefficient */
nbits = 0;
while (temp) {
nbits++;
temp >>= 1;
}
/* Check for out-of-range coefficient values.
* Since we're encoding a difference, the range limit is twice as much.
*/
if (nbits > MAX_COEF_BITS+1)
ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
/* Find the number of bits needed for the magnitude of the coefficient */
nbits = 0;
do nbits++; /* there must be at least one 1 bit */
while ((temp >>= 1));
/* Check for out-of-range coefficient values.
* Since we're encoding a difference, the range limit is twice as much.
*/
if (nbits > max_coef_bits)
ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
/* Emit the Huffman-coded symbol for the number of bits */
if (! emit_bits_s(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits]))
return FALSE;
/* Emit the Huffman-coded symbol for the number of bits */
if (! emit_bits_s(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits]))
return FALSE;
/* Emit that number of bits of the value, if positive, */
/* or the complement of its magnitude, if negative. */
if (nbits) /* emit_bits rejects calls with size 0 */
/* Emit that number of bits of the value, if positive, */
/* or the complement of its magnitude, if negative. */
if (! emit_bits_s(state, (unsigned int) temp2, nbits))
return FALSE;
}
/* Encode the AC coefficients per section F.1.2.2 */
r = 0; /* r = run length of zeros */
for (k = 1; k <= Se; k++) {
if ((temp2 = block[natural_order[k]]) == 0) {
if ((temp = block[natural_order[k]]) == 0) {
r++;
} else {
/* if run length > 15, must emit special run-length-16 codes (0xF0) */
while (r > 15) {
if (! emit_bits_s(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0]))
return FALSE;
r -= 16;
}
temp = temp2;
if (temp < 0) {
temp = -temp; /* temp is abs value of input */
/* This code assumes we are on a two's complement machine */
temp2--;
}
/* Find the number of bits needed for the magnitude of the coefficient */
nbits = 1; /* there must be at least one 1 bit */
while ((temp >>= 1))
nbits++;
/* Check for out-of-range coefficient values */
if (nbits > MAX_COEF_BITS)
ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
/* Emit Huffman symbol for run length / number of bits */
temp = (r << 4) + nbits;
if (! emit_bits_s(state, actbl->ehufco[temp], actbl->ehufsi[temp]))
return FALSE;
continue;
}
/* Emit that number of bits of the value, if positive, */
/* or the complement of its magnitude, if negative. */
if (! emit_bits_s(state, (unsigned int) temp2, nbits))
/* if run length > 15, must emit special run-length-16 codes (0xF0) */
while (r > 15) {
if (! emit_bits_s(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0]))
return FALSE;
r -= 16;
}
r = 0;
if ((temp2 = temp) < 0) {
temp = -temp; /* temp is abs value of input */
/* For a negative coef, want temp2 = bitwise complement of abs(coef) */
/* This code assumes we are on a two's complement machine */
temp2--;
}
/* Find the number of bits needed for the magnitude of the coefficient */
nbits = 0;
do nbits++; /* there must be at least one 1 bit */
while ((temp >>= 1));
/* Check for out-of-range coefficient values.
* Use ">=" instead of ">" so can use the
* same one larger limit from DC check here.
*/
if (nbits >= max_coef_bits)
ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
/* Emit Huffman symbol for run length / number of bits */
temp = (r << 4) + nbits;
if (! emit_bits_s(state, actbl->ehufco[temp], actbl->ehufsi[temp]))
return FALSE;
/* Emit that number of bits of the value, if positive, */
/* or the complement of its magnitude, if negative. */
if (! emit_bits_s(state, (unsigned int) temp2, nbits))
return FALSE;
r = 0; /* reset zero run length */
}
/* If the last coef(s) were zero, emit an end-of-block code */
......@@ -1122,28 +1132,31 @@ htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
register int nbits;
register int r, k;
int Se = cinfo->lim_Se;
int max_coef_bits = cinfo->data_precision + 3;
const int * natural_order = cinfo->natural_order;
/* Encode the DC coefficient difference per section F.1.2.1 */
temp = block[0] - last_dc_val;
if (temp < 0)
temp = -temp;
if ((temp = block[0] - last_dc_val) == 0) {
/* Count the Huffman symbol for the number of bits */
dc_counts[0]++;
} else {
if (temp < 0)
temp = -temp; /* temp is abs value of input */
/* Find the number of bits needed for the magnitude of the coefficient */
nbits = 0;
while (temp) {
nbits++;
temp >>= 1;
}
/* Check for out-of-range coefficient values.
* Since we're encoding a difference, the range limit is twice as much.
*/
if (nbits > MAX_COEF_BITS+1)
ERREXIT(cinfo, JERR_BAD_DCT_COEF);
/* Find the number of bits needed for the magnitude of the coefficient */
nbits = 0;
do nbits++; /* there must be at least one 1 bit */
while ((temp >>= 1));
/* Check for out-of-range coefficient values.
* Since we're encoding a difference, the range limit is twice as much.
*/
if (nbits > max_coef_bits)
ERREXIT(cinfo, JERR_BAD_DCT_COEF);
/* Count the Huffman symbol for the number of bits */
dc_counts[nbits]++;
/* Count the Huffman symbol for the number of bits */
dc_counts[nbits]++;
}
/* Encode the AC coefficients per section F.1.2.2 */
......@@ -1152,30 +1165,33 @@ htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
for (k = 1; k <= Se; k++) {
if ((temp = block[natural_order[k]]) == 0) {
r++;
} else {
/* if run length > 15, must emit special run-length-16 codes (0xF0) */
while (r > 15) {
ac_counts[0xF0]++;
r -= 16;
}
continue;
}
/* if run length > 15, must emit special run-length-16 codes (0xF0) */
while (r > 15) {
ac_counts[0xF0]++;
r -= 16;
}
/* Find the number of bits needed for the magnitude of the coefficient */
if (temp < 0)
temp = -temp;
if (temp < 0)
temp = -temp; /* temp is abs value of input */
/* Find the number of bits needed for the magnitude of the coefficient */
nbits = 1; /* there must be at least one 1 bit */
while ((temp >>= 1))
nbits++;
/* Check for out-of-range coefficient values */
if (nbits > MAX_COEF_BITS)
ERREXIT(cinfo, JERR_BAD_DCT_COEF);
/* Find the number of bits needed for the magnitude of the coefficient */
nbits = 0;
do nbits++; /* there must be at least one 1 bit */
while ((temp >>= 1));
/* Check for out-of-range coefficient values.
* Use ">=" instead of ">" so can use the
* same one larger limit from DC check here.
*/
if (nbits >= max_coef_bits)
ERREXIT(cinfo, JERR_BAD_DCT_COEF);
/* Count Huffman symbol for run length / number of bits */
ac_counts[(r << 4) + nbits]++;
/* Count Huffman symbol for run length / number of bits */
ac_counts[(r << 4) + nbits]++;
r = 0;
}
r = 0; /* reset zero run length */
}
/* If the last coef(s) were zero, emit an end-of-block code */
......
libs/jpeg/jdcolor.c
View file @ 73a8c068
......@@ -2,7 +2,7 @@
* jdcolor.c
*
* Copyright (C) 1991-1997, Thomas G. Lane.
* Modified 2011-2020 by Guido Vollbeding.
* Modified 2011-2023 by Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
......@@ -32,7 +32,9 @@ typedef struct {
INT32 * Cb_g_tab; /* => table for Cb to G conversion */
/* Private state for RGB->Y conversion */
INT32 * rgb_y_tab; /* => table for RGB to Y conversion */
INT32 * R_y_tab; /* => table for R to Y conversion */
INT32 * G_y_tab; /* => table for G to Y conversion */
INT32 * B_y_tab; /* => table for B to Y conversion */
} my_color_deconverter;
typedef my_color_deconverter * my_cconvert_ptr;
......@@ -87,29 +89,17 @@ typedef my_color_deconverter * my_cconvert_ptr;
* by precalculating the constants times Cb and Cr for all possible values.
* For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
* for 9-bit to 12-bit samples it is still acceptable. It's not very
* reasonable for 16-bit samples, but if you want lossless storage you
* shouldn't be changing colorspace anyway.
* The Cr=>R and Cb=>B values can be rounded to integers in advance; the
* values for the G calculation are left scaled up, since we must add them
* together before rounding.
* reasonable for 16-bit samples, but if you want lossless storage
* you shouldn't be changing colorspace anyway.
* The Cr=>R and Cb=>B values can be rounded to integers in advance;
* the values for the G calculation are left scaled up,
* since we must add them together before rounding.
*/
#define SCALEBITS 16 /* speediest right-shift on some machines */
#define ONE_HALF ((INT32) 1 << (SCALEBITS-1))
#define FIX(x) ((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
/* We allocate one big table for RGB->Y conversion and divide it up into
* three parts, instead of doing three alloc_small requests. This lets us
* use a single table base address, which can be held in a register in the
* inner loops on many machines (more than can hold all three addresses,
* anyway).
*/
#define R_Y_OFF 0 /* offset to R => Y section */
#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */
#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */
#define TABLE_SIZE (3*(MAXJSAMPLE+1))
/*
* Initialize tables for YCbCr->RGB and BG_YCC->RGB colorspace conversion.
......@@ -249,17 +239,19 @@ LOCAL(void)
build_rgb_y_table (j_decompress_ptr cinfo)
{
my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
INT32 * rgb_y_tab;
INT32 i;
/* Allocate and fill in the conversion tables. */
cconvert->rgb_y_tab = rgb_y_tab = (INT32 *) (*cinfo->mem->alloc_small)
((j_common_ptr) cinfo, JPOOL_IMAGE, TABLE_SIZE * SIZEOF(INT32));
cconvert->R_y_tab = (INT32 *) (*cinfo->mem->alloc_small)
((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(INT32));
cconvert->G_y_tab = (INT32 *) (*cinfo->mem->alloc_small)
((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(INT32));
cconvert->B_y_tab = (INT32 *) (*cinfo->mem->alloc_small)
((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE+1) * SIZEOF(INT32));
for (i = 0; i <= MAXJSAMPLE; i++) {
rgb_y_tab[i+R_Y_OFF] = FIX(0.299) * i;
rgb_y_tab[i+G_Y_OFF] = FIX(0.587) * i;
rgb_y_tab[i+B_Y_OFF] = FIX(0.114) * i + ONE_HALF;
cconvert->R_y_tab[i] = FIX(0.299) * i;
cconvert->G_y_tab[i] = FIX(0.587) * i;
cconvert->B_y_tab[i] = FIX(0.114) * i + ONE_HALF;
}
}
......@@ -274,8 +266,10 @@ rgb_gray_convert (j_decompress_ptr cinfo,
JSAMPARRAY output_buf, int num_rows)
{
my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
register int r, g, b;
register INT32 * ctab = cconvert->rgb_y_tab;
register INT32 y;
register INT32 * Rytab = cconvert->R_y_tab;
register INT32 * Gytab = cconvert->G_y_tab;
register INT32 * Bytab = cconvert->B_y_tab;
register JSAMPROW outptr;
register JSAMPROW inptr0, inptr1, inptr2;
register JDIMENSION col;
......@@ -288,13 +282,10 @@ rgb_gray_convert (j_decompress_ptr cinfo,
input_row++;
outptr = *output_buf++;
for (col = 0; col < num_cols; col++) {
r = GETJSAMPLE(inptr0[col]);
g = GETJSAMPLE(inptr1[col]);
b = GETJSAMPLE(inptr2[col]);
/* Y */
outptr[col] = (JSAMPLE)
((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
>> SCALEBITS);
y = Rytab[GETJSAMPLE(inptr0[col])];
y += Gytab[GETJSAMPLE(inptr1[col])];
y += Bytab[GETJSAMPLE(inptr2[col])];
outptr[col] = (JSAMPLE) (y >> SCALEBITS);
}
}
}
......@@ -354,7 +345,10 @@ rgb1_gray_convert (j_decompress_ptr cinfo,
{
my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
register int r, g, b;
register INT32 * ctab = cconvert->rgb_y_tab;
register INT32 y;
register INT32 * Rytab = cconvert->R_y_tab;
register INT32 * Gytab = cconvert->G_y_tab;
register INT32 * Bytab = cconvert->B_y_tab;
register JSAMPROW outptr;
register JSAMPROW inptr0, inptr1, inptr2;
register JDIMENSION col;
......@@ -373,12 +367,10 @@ rgb1_gray_convert (j_decompress_ptr cinfo,
/* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD
* (modulo) operator is equivalent to the bitmask operator AND.
*/
r = (r + g - CENTERJSAMPLE) & MAXJSAMPLE;
b = (b + g - CENTERJSAMPLE) & MAXJSAMPLE;
/* Y */
outptr[col] = (JSAMPLE)
((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
>> SCALEBITS);
y = Rytab[(r + g - CENTERJSAMPLE) & MAXJSAMPLE];
y += Gytab[g];
y += Bytab[(b + g - CENTERJSAMPLE) & MAXJSAMPLE];
outptr[col] = (JSAMPLE) (y >> SCALEBITS);
}
}
}
......@@ -565,8 +557,10 @@ cmyk_yk_convert (j_decompress_ptr cinfo,
JSAMPARRAY output_buf, int num_rows)
{
my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
register int r, g, b;
register INT32 * ctab = cconvert->rgb_y_tab;
register INT32 y;
register INT32 * Rytab = cconvert->R_y_tab;
register INT32 * Gytab = cconvert->G_y_tab;
register INT32 * Bytab = cconvert->B_y_tab;
register JSAMPROW outptr;
register JSAMPROW inptr0, inptr1, inptr2, inptr3;
register JDIMENSION col;
......@@ -580,13 +574,10 @@ cmyk_yk_convert (j_decompress_ptr cinfo,
input_row++;
outptr = *output_buf++;
for (col = 0; col < num_cols; col++) {
r = MAXJSAMPLE - GETJSAMPLE(inptr0[col]);
g = MAXJSAMPLE - GETJSAMPLE(inptr1[col]);
b = MAXJSAMPLE - GETJSAMPLE(inptr2[col]);
/* Y */
outptr[0] = (JSAMPLE)
((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
>> SCALEBITS);
y = Rytab[MAXJSAMPLE - GETJSAMPLE(inptr0[col])];
y += Gytab[MAXJSAMPLE - GETJSAMPLE(inptr1[col])];
y += Bytab[MAXJSAMPLE - GETJSAMPLE(inptr2[col])];
outptr[0] = (JSAMPLE) (y >> SCALEBITS);
/* K passes through unchanged */
outptr[1] = inptr3[col]; /* don't need GETJSAMPLE here */
outptr += 2;
......
libs/jpeg/jdct.h
View file @ 73a8c068
......@@ -2,7 +2,7 @@
* jdct.h
*
* Copyright (C) 1994-1996, Thomas G. Lane.
* Modified 2002-2019 by Guido Vollbeding.
* Modified 2002-2023 by Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
......@@ -158,7 +158,7 @@ typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */
#define jpeg_idct_6x12 jRD6x12
#define jpeg_idct_5x10 jRD5x10
#define jpeg_idct_4x8 jRD4x8
#define jpeg_idct_3x6 jRD3x8
#define jpeg_idct_3x6 jRD3x6
#define jpeg_idct_2x4 jRD2x4
#define jpeg_idct_1x2 jRD1x2
#endif /* NEED_SHORT_EXTERNAL_NAMES */
......
libs/jpeg/jdmerge.c
View file @ 73a8c068
......@@ -2,7 +2,7 @@
* jdmerge.c
*
* Copyright (C) 1994-1996, Thomas G. Lane.
* Modified 2013-2020 by Guido Vollbeding.
* Modified 2013-2022 by Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
......@@ -20,17 +20,17 @@
* B = Y + K4 * Cb
* only the Y term varies among the group of pixels corresponding to a pair
* of chroma samples, so the rest of the terms can be calculated just once.
* At typical sampling ratios, this eliminates half or three-quarters of the
* multiplications needed for color conversion.
* At typical sampling ratios, this eliminates half or three-quarters
* of the multiplications needed for color conversion.
*
* This file currently provides implementations for the following cases:
* YCC => RGB color conversion only (YCbCr or BG_YCC).
* Sampling ratios of 2h1v or 2h2v.
* No scaling needed at upsample time.
* Corner-aligned (non-CCIR601) sampling alignment.
* Other special cases could be added, but in most applications these are
* the only common cases. (For uncommon cases we fall back on the more
* general code in jdsample.c and jdcolor.c.)
* Other special cases could be added, but in most applications these
* are the only common cases. (For uncommon cases we fall back on
* the more general code in jdsample.c and jdcolor.c.)
*/
#define JPEG_INTERNALS
......@@ -286,9 +286,9 @@ h2v1_merged_upsample (j_decompress_ptr cinfo,
/* Do the chroma part of the calculation */
cb = GETJSAMPLE(*inptr1++);
cr = GETJSAMPLE(*inptr2++);
cred = Crrtab[cr];
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
cblue = Cbbtab[cb];
cred = Crrtab[cr];
/* Fetch 2 Y values and emit 2 pixels */
y = GETJSAMPLE(*inptr0++);
outptr[RGB_RED] = range_limit[y + cred];
......@@ -303,15 +303,14 @@ h2v1_merged_upsample (j_decompress_ptr cinfo,
}
/* If image width is odd, do the last output column separately */
if (cinfo->output_width & 1) {
y = GETJSAMPLE(*inptr0);
cb = GETJSAMPLE(*inptr1);
cr = GETJSAMPLE(*inptr2);
cred = Crrtab[cr];
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
cblue = Cbbtab[cb];
y = GETJSAMPLE(*inptr0);
outptr[RGB_RED] = range_limit[y + cred];
outptr[RGB_GREEN] = range_limit[y + cgreen];
outptr[RGB_BLUE] = range_limit[y + cblue];
outptr[RGB_RED] = range_limit[y + Crrtab[cr]];
outptr[RGB_GREEN] = range_limit[y +
((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
SCALEBITS))];
outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]];
}
}
......@@ -350,9 +349,9 @@ h2v2_merged_upsample (j_decompress_ptr cinfo,
/* Do the chroma part of the calculation */
cb = GETJSAMPLE(*inptr1++);
cr = GETJSAMPLE(*inptr2++);
cred = Crrtab[cr];
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
cblue = Cbbtab[cb];
cred = Crrtab[cr];
/* Fetch 4 Y values and emit 4 pixels */
y = GETJSAMPLE(*inptr00++);
outptr0[RGB_RED] = range_limit[y + cred];
......@@ -379,9 +378,9 @@ h2v2_merged_upsample (j_decompress_ptr cinfo,
if (cinfo->output_width & 1) {
cb = GETJSAMPLE(*inptr1);
cr = GETJSAMPLE(*inptr2);
cred = Crrtab[cr];
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
cblue = Cbbtab[cb];
cred = Crrtab[cr];
y = GETJSAMPLE(*inptr00);
outptr0[RGB_RED] = range_limit[y + cred];
outptr0[RGB_GREEN] = range_limit[y + cgreen];
......
libs/jpeg/jinclude.h
View file @ 73a8c068
......@@ -2,7 +2,7 @@
* jinclude.h
*
* Copyright (C) 1991-1994, Thomas G. Lane.
* Modified 2017 by Guido Vollbeding.
* Modified 2017-2022 by Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
......@@ -11,8 +11,8 @@
* care of by the standard jconfig symbols, but on really weird systems
* you may have to edit this file.)
*
* NOTE: this file is NOT intended to be included by applications using the
* JPEG library. Most applications need only include jpeglib.h.
* NOTE: this file is NOT intended to be included by applications using
* the JPEG library. Most applications need only include jpeglib.h.
*/
......@@ -87,11 +87,71 @@
*
* Furthermore, macros are provided for fflush() and ferror() in order
* to facilitate adaption by applications using an own FILE class.
*
* You can define your own custom file I/O functions in jconfig.h and
* #define JPEG_HAVE_FILE_IO_CUSTOM there to prevent redefinition here.
*
* You can #define JPEG_USE_FILE_IO_CUSTOM in jconfig.h to use custom file
* I/O functions implemented in Delphi VCL (Visual Component Library)
* in Vcl.Imaging.jpeg.pas for the TJPEGImage component utilizing
* the Delphi RTL (Run-Time Library) TMemoryStream component:
*
* procedure jpeg_stdio_src(var cinfo: jpeg_decompress_struct;
* input_file: TStream); external;
*
* procedure jpeg_stdio_dest(var cinfo: jpeg_compress_struct;
* output_file: TStream); external;
*
* function jfread(var buf; recsize, reccount: Integer; S: TStream): Integer;
* begin
* Result := S.Read(buf, recsize * reccount);
* end;
*
* function jfwrite(const buf; recsize, reccount: Integer; S: TStream): Integer;
* begin
* Result := S.Write(buf, recsize * reccount);
* end;
*
* function jfflush(S: TStream): Integer;
* begin
* Result := 0;
* end;
*
* function jferror(S: TStream): Integer;
* begin
* Result := 0;
* end;
*
* TMemoryStream of Delphi RTL has the distinctive feature to provide dynamic
* memory buffer management with a file/stream-based interface, particularly for
* the write (output) operation, which is easier to apply compared with direct
* implementations as given in jdatadst.c for memory destination. Those direct
* implementations of dynamic memory write tend to be more difficult to use,
* so providing an option like TMemoryStream may be a useful alternative.
*
* The CFile/CMemFile classes of the Microsoft Foundation Class (MFC) Library
* may be used in a similar fashion.
*/
#ifndef JPEG_HAVE_FILE_IO_CUSTOM
#ifdef JPEG_USE_FILE_IO_CUSTOM
extern size_t jfread(void * __ptr, size_t __size, size_t __n, FILE * __stream);
extern size_t jfwrite(const void * __ptr, size_t __size, size_t __n, FILE * __stream);
extern int jfflush(FILE * __stream);
extern int jferror(FILE * __fp);
#define JFREAD(file,buf,sizeofbuf) \
((size_t) jfread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
#define JFWRITE(file,buf,sizeofbuf) \
((size_t) jfwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
#define JFFLUSH(file) jfflush(file)
#define JFERROR(file) jferror(file)
#else
#define JFREAD(file,buf,sizeofbuf) \
((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
#define JFWRITE(file,buf,sizeofbuf) \
((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
#define JFFLUSH(file) fflush(file)
#define JFERROR(file) ferror(file)
#endif
#endif
libs/jpeg/jmorecfg.h
View file @ 73a8c068
......@@ -2,7 +2,7 @@
* jmorecfg.h
*
* Copyright (C) 1991-1997, Thomas G. Lane.
* Modified 1997-2013 by Guido Vollbeding.
* Modified 1997-2022 by Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
......@@ -351,8 +351,8 @@ typedef enum { FALSE = 0, TRUE = 1 } boolean;
#define C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */
#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/
#define DCT_SCALING_SUPPORTED /* Input rescaling via DCT? (Requires DCT_ISLOW)*/
#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN) */
#define DCT_SCALING_SUPPORTED /* Input rescaling via DCT? (Requires DCT_ISLOW) */
#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */
/* Note: if you selected more than 8-bit data precision, it is dangerous to
* turn off ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only
......@@ -369,8 +369,8 @@ typedef enum { FALSE = 0, TRUE = 1 } boolean;
#define D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */
#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/
#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? (Requires DCT_ISLOW)*/
#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN) */
#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? (Requires DCT_ISLOW) */
#define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */
#define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */
#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */
......@@ -384,20 +384,31 @@ typedef enum { FALSE = 0, TRUE = 1 } boolean;
/*
* Ordering of RGB data in scanlines passed to or from the application.
* If your application wants to deal with data in the order B,G,R, just
* change these macros. You can also deal with formats such as R,G,B,X
* (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing
* the offsets will also change the order in which colormap data is organized.
* #define JPEG_USE_RGB_CUSTOM in jconfig.h, or define your own custom
* order in jconfig.h and #define JPEG_HAVE_RGB_CUSTOM.
* You can also deal with formats such as R,G,B,X (one extra byte per pixel)
* by changing RGB_PIXELSIZE.
* Note that changing the offsets will also change
* the order in which colormap data is organized.
* RESTRICTIONS:
* 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats.
* 2. The color quantizer modules will not behave desirably if RGB_PIXELSIZE
* is not 3 (they don't understand about dummy color components!). So you
* can't use color quantization if you change that value.
* is not 3 (they don't understand about dummy color components!).
* So you can't use color quantization if you change that value.
*/
#ifndef JPEG_HAVE_RGB_CUSTOM
#ifdef JPEG_USE_RGB_CUSTOM
#define RGB_RED 2 /* Offset of Red in an RGB scanline element */
#define RGB_GREEN 1 /* Offset of Green */
#define RGB_BLUE 0 /* Offset of Blue */
#else
#define RGB_RED 0 /* Offset of Red in an RGB scanline element */
#define RGB_GREEN 1 /* Offset of Green */
#define RGB_BLUE 2 /* Offset of Blue */
#endif
#define RGB_PIXELSIZE 3 /* JSAMPLEs per RGB scanline element */
#endif
/* Definitions for speed-related optimizations. */
......
libs/jpeg/jpeglib.h
View file @ 73a8c068
......@@ -2,7 +2,7 @@
* jpeglib.h
*
* Copyright (C) 1991-1998, Thomas G. Lane.
* Modified 2002-2020 by Guido Vollbeding.
* Modified 2002-2022 by Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
......@@ -39,7 +39,7 @@ extern "C" {
#define JPEG_LIB_VERSION 90 /* Compatibility version 9.0 */
#define JPEG_LIB_VERSION_MAJOR 9
#define JPEG_LIB_VERSION_MINOR 5
#define JPEG_LIB_VERSION_MINOR 6
/* Various constants determining the sizes of things.
......
libs/jpeg/jversion.h
View file @ 73a8c068
/*
* jversion.h
*
* Copyright (C) 1991-2022, Thomas G. Lane, Guido Vollbeding.
* Copyright (C) 1991-2024, Thomas G. Lane, Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
......@@ -9,6 +9,6 @@
*/
#define JVERSION "9e 16-Jan-2022"
#define JVERSION "9f 14-Jan-2024"
#define JCOPYRIGHT "Copyright (C) 2022, Thomas G. Lane, Guido Vollbeding"
#define JCOPYRIGHT "Copyright (C) 2024, Thomas G. Lane, Guido Vollbeding"
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment