Signed-off-by: Nikolai Shields <nikolai@nikolaishields.com>

* Increase the default snapshot timeout. The timeout is not currently
  configurable from Rancher, and larger clusters are frequently seeing
  uploads fail at 30 seconds.
* Enable compression for scheduled snapshots if enabled on the
  command-line. The CLI flag was not being passed into the etcd config.
* Only set the S3 content-type to application/zip if the file is zipped.
* Don't run more than one snapshot at once, to prevent misconfigured
  etcd snapshot cron schedules from stacking up.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Includes fix for ENOSYS/EPERM issue on s390x.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Includes fix for recently identified memory leak.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Since #4438 removed 2-way sync and treats any changed+newer files on disk as an error, we no longer need to determine if files are newer on disk/db or if there is a conflicting mix of both. Any changed+newer file is an error, unless we're doing a cluster reset in which case everything is unconditionally replaced.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Properly skip restoring bootstrap data for files that don't have a path
set because the feature that would set it isn't enabled.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
(cherry picked from commit 3cebde92)

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Service.Spec.IPFamilyPolicy may be a nil pointer on freshly upgraded clusters.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Use same kubelet-preferred-address-types setting as RKE2 to improve reliability of the egress selector when using a HTTP proxy. Also, use BindAddressOrLoopback to ensure that the correct supervisor address is used when --bind-address is set.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Properly handle unset egress-selector-mode from existing servers during cluster upgrade.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

* Move to fixed version of continuity
Signed-off-by: Derek Nola <derek.nola@suse.com>

Signed-off-by: Derek Nola <derek.nola@suse.com>

* Testing directory rework
* New cert rotation test
* Remove unnecessary e2e go.mod
* Move cgroup and install tests out of the vagrant directory
* Remove unit test from Drone
Signed-off-by: Derek Nola <derek.nola@suse.com>

Update to v1.22.11-k3s1

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

[Release 1.22] Flannel version update to 0.18.1 and added the ability to configure additional options for wireguard backend

Signed-off-by: Roberto Bonafiglia <roberto.bonafiglia@suse.com>

Allow the flannel backend to be specified as
backend=option=val,option2=val2 to select a given backend with extra options.

In particular this adds the following options to wireguard-native
backend:
* Mode - flannel wireguard tunnel mode
* PersistentKeepaliveInterval- wireguard persistent keepalive interval
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

* Move startup hooks wg into a runtime pointer, check before notifying systemd
* Switch default systemd notification to server
* Add 1 sec delay to allow etcd to write to disk
Signed-off-by: Derek Nola <derek.nola@suse.com>

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

If the user points S3 backups at a bucket containing other files, those
file names may not be valid configmap keys.

For example, RKE1 generates backup files with names like
`s3-c-zrjnb-rs-6hxpk_2022-05-05T12:05:15Z.zip`; the semicolons in the
timestamp portion of the name are not allowed for use in configmap keys.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

From https://github.com/urfave/cli/pull/1383 :
> This removes the resulting binary dependency on cpuguy83/md2man and
> russross/blackfriday (and a few more packages imported by those),
> which saves more than 400 KB (more than 300 KB
> once stripped) from the resulting binary.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

[Release 1.22] Add FlannelConfCNI flag

[Release 1.22] Remove kube-ipvs0 interface when cleaning up

* Integration Test: Startup (#5630)

* New startup integration test
* Add testing section to PR template
* Move helper functions to direct k8s client calls
Signed-off-by: Derek Nola <derek.nola@suse.com>

* E2E Improvements and groundwork for test-pad tool (#5593)

* Add rancher install sript, taints to cp/etcd roles
* Revert back to generic/ubuntu2004, libvirt networking is unreliable on opensuse
* Added support for alpine
* Rancher deployment script
* Refactor installType into function
* Cleanup splitserver test
Signed-off-by: Derek Nola <derek.nola@suse.com>

* E2E: Dualstack test (#5617)

* E2E dualstack test
* Improve testing documentation
Signed-off-by: Derek Nola <derek.nola@suse.com>

* Fix import
Signed-off-by: Derek Nola <derek.nola@suse.com>

Signed-off-by: igor <igor@igor.io>
Signed-off-by: Derek Nola <derek.nola@suse.com>
Co-authored-by: Igor <igorwwwwwwwwwwwwwwwwwwww@users.noreply.github.com>

Signed-off-by: Manuel Buil <mbuil@suse.com>

Signed-off-by: Manuel Buil <mbuil@suse.com>

... until QA flakes can be addressed.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

The control-plane context handles requests outside the cluster and
should not be sent to the proxy.

In agent mode, we don't watch pods and just direct-dial any request for
a non-node address, which is the original behavior.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Watching pods appears to be the most reliable way to ensure that the
proxy routes and authorizes connections.
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* Add shell completion CLI
Signed-off-by: Derek Nola <derek.nola@suse.com>

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
(cherry picked from commit 1ef34728)

* Remove objects when removed from manifests

If a user puts a file in /var/lib/rancher/k3s/server/manifests/ then the
objects contained therein are deployed to the cluster. If the objects
are removed from that file, they are not removed from the cluster.

This change tracks the GVKs in the files and will remove objects when
there are removed from the cluster.
Signed-off-by: Donnie Adams <donnie.adams@suse.com>
(cherry picked from commit c38a8c3b)
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>