Commit 657c0bf6 has silently added use/bootloader
to the base use/install2 target thus breaking
experimental distro/netinst; it seems better to
require *a* bootloader in the target that's been
specifically designed to cover the common case
(thus linked to by +installer shortcut) but still
to have our base lightweight and flexible.

This doesn't hurt the actual distros as these use
+installer of course.

Looks like it's been dumped in along with the rest but not
actually used in {make-initrd-,}propagator; the problem with it
is that snd-dummy.ko matches and pulls a bunch of unrelated
modules where these don't belong (grep -w wouldn't match
snd_dummy.ko though).

These can be found in (semi-)supported branches still:

- loop.ko:
  + 3.0.101-std-def-alt0.M60P.1
  + 3.4.96-led-ws-alt0.M70P.1
- aufs.ko:
  + 2.6.32-el-smp-alt31
  + 3.4.96-led-ws-alt0.M70P.1

ehci_marvell.ko isn't found in contemporary sisyphus/armh
kernels but let's purge it later during archdep rewrite.

NB: libusual.ko has been renamed to usb-libusual.ko as of p6
    (not to be found in p7 anymore), and nls_base.ko was in
    2.6.32 kernels as of p6 but not there in p7; purge these
    somewhere down the road.

This file has been floating around for quite some time,
and some of its contents are pure bit rot by now...

Drop the modules that don't exist as of 3.19.2-un-def-alt1
upon manual diff examination.

It wasn't sdhci_pci.ko back in 2.6.32 actually and it's
sdhci-pci.ko; so grep used by mkmodpack won't pick it up.

This has been missing for *so* long somehow, and adding some 200k
of modules for fast hardware that's widely available by now
looks like a deal.

Added USB Attached SCSI module just in case (or rather for weak
crc_t10dif symbols?).

There are a few ones that aren't needed for a one-time
environment off a LiveCD/Flash like a webkiosk; if you
happen to need a text-based kiosk some day, tell me so.

This one is based on live-flightgear of course.

clementine-codecs-* looks more appropriate than direct
lowlevel dependency list indeed; thanks cow@.

There's no excuse to miss it now that it's there.

The corresponding installer feature had to be updated first
following blkid(8) output format changes, but that's it!

- starterkits-20150312

Shame on me, gnustep mixin is only used in gnustep flavour
while wmaker one is used in both gnustep and wmaker flavours.

So the default serif fonts in regular-wmaker.iso were still ugly.

Consistent case and LAMP the '00s buzzword!

I don't know of [k]powersave interactions with systemd
and the rest of that ilk, let's be cautious and only provide
it for sysv-tde images which have been actually tested
by Speccyfighter who asked for this package.

Can't tell for sure but something seems to break
suspend menu option (hibernate isn't supported in
all of the regular builds/starterkits just yet).

These aren't going to survive use/cleanup/x11 anyways
(and weren't that generic in the first place); let root@
install whatever they actually need later.

This refactoring is aimed at both providing reasonable
alterator package set in server-ovz (and server-hyperv)
while purging the install-time modules from plain server
as these were useless without a frontend package like
the web-based alterator-fbi.

A few more additions proposed by Sluggard:
http://www.opennet.ru/openforum/vsluhforumID3/101671.html#182

...and it seems like LIVE_PACKAGES are asking for a pkglist;
let's switch to THE_PACKAGES for remainder while at that.

...as requested by Speccyfighter:
http://forum.altlinux.org/index.php/topic,34272.msg249405.html#msg249405

It used to run NM without any kind of applet which is
not exactly usable unless it's DHCP over Ethernet there;
provide connman and qconnman-ui (applets on the road).

This has been proposed for server-hyperv by lewellyn@freenode
last summer, looks like a reasonable default for all of the
server images as those interersted in bridge setup are going
to do a few more things anyways.

This image has been cleaned up somewhat thoroughly
regarding its installed package base but partitioning
has remained poorly generic with swap etc; it's now
been set to use 3/4 Gb as a minimum (to fit 1Gb VMs
or USB sticks just fine) with the only partition
created being root one; those wishing something else
are welcome to go ahead and partition by hand anyways.

See also https://bugzilla.altlinux.org/30024

- EFI_BOOTARGS

It's not use/cleanup/x11-alterator in its entirety
but qt4-core is really *really* not needed there.

propagator-20150306-alt1 and make-initrd-propagator-0.25-alt1
have made it actually possible to use resulting LiveCD images
along with USB flash media to achieve data persistence that's
been long available for BIOS boot mode (see also #28289).

This isn't perfect but let's try flipping the switch:
all desktop regular builds are now "live_rw" by default
in EFI mode.

This requires mkimage >= 0.2.17.

This image doesn't deign to waste one's time by presenting
them with a bootloader menu and a few other things;
make it even less verbose where not neccessary.

Looks like we'd better provide a few really good console fonts.

cool-retro-term 1.0.0 exhibits a bug without these fonts around:
glyphs would be drawn higher than cursor with upper half being
cut off (found out by putting my current crop of font packages
into livecd environment and removing them until the correct
behaviour would get broken).

xpra.org and winswitch.org are wonderful applications
helping one working with X11 apps all over the place,
running those on local and remote desktops and servers
with persistent sessions.

These aren't exactly trivial to plan and use but icewm
isn't for newbies either; thus these seem like nice match
for an "X11 thin client" image.

Size addition is ca. 50 Mb as of today which is a lot
but worth it.

This nice FTP/HTTP client has one issue that bars its inclusion
into every regular desktop image: lftp.desktop file that pops up
in menu but only offers an xterm with a CLI-based utility which
feels embarrassing for a casual user unfamiliar with its power.

IceWM users shouldn't be surprised however.

...as suggested by Sluggard again:
http://www.opennet.ru/openforum/vsluhforumID3/101671.html#143

This has been suggested by Sluggard at opennet:
http://www.opennet.ru/openforum/vsluhforumID3/101671.html#91

It's been missing roughly from the start there :-/

The former approach to handling "LiveCD with sessions"
has been to mangle "automatic=method:cdrom" into
"automatic=method:disk,label:ALT*" within gfxboot
so that propagator and make-initrd-propagator would
try and discover/create a filesystem labelled
"alt-live-storage" on a LiveFlash's free space.

Then "live_rw" handling has been unified in
make-initrd-propagator (as of 0.18-alt1) to accept
any of "label" subparameter or "live_rw" argument
to go and create_disk_slice().

Then propagator's cdrom.c has been fixed to actually
try sdX1 before sdX (as of 20150306-alt1).

And now it's all been tested to verify that:
- flash "ro" and "rw" boot is OK
- CD-ROM "ro" boot is OK
- CD-ROM "rw" boot is fine given that there's
  a partition labeled "alt-live-storage" elsewhere

This is a can of worms indeed :-/

References
~~~~~~~~~~
* http://altlinux.org/initrd-propagator
* http://altlinux.org/make-initrd-propagator
* http://bugzilla.altlinux.org/28289

The problem is URW again (just as in commit ab44f800),
and the workaround is the same either.

That's what's been found via "qt game" query with Synaptic
while running a functional testing session upon lxqt starterkit
beta as of 20150305 :)

It's entirely unclear to an unsuspecting curious user
where the actual results of a proposed example hasher
build end up; that's ~/hasher/repo, just state that.

Is it news or was it missing all the way through?..