zlib: Import upstream release 1.2.13.

libs/zlib/LICENSE

-Acknowledgments:
-
-  The deflate format used by zlib was defined by Phil Katz.  The deflate and
-  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
-  people who reported problems and suggested various improvements in zlib; they
-  are too numerous to cite here.
-
 Copyright notice:
 
- (C) 1995-2017 Jean-loup Gailly and Mark Adler
+ (C) 1995-2022 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages

libs/zlib/crc32.c

@@ -98,13 +98,22 @@
 #  endif
 #endif
 
+/* If available, use the ARM processor CRC32 instruction. */
+#if defined(__aarch64__) && defined(__ARM_FEATURE_CRC32) && W == 8
+#  define ARMCRC32
+#endif
+
 /* Local functions. */
 local z_crc_t multmodp OF((z_crc_t a, z_crc_t b));
 local z_crc_t x2nmodp OF((z_off64_t n, unsigned k));
 
-/* If available, use the ARM processor CRC32 instruction. */
-#if defined(__aarch64__) && defined(__ARM_FEATURE_CRC32) && W == 8
-#  define ARMCRC32
+#if defined(W) && (!defined(ARMCRC32) || defined(DYNAMIC_CRC_TABLE))
+    local z_word_t byte_swap OF((z_word_t word));
+#endif
+
+#if defined(W) && !defined(ARMCRC32)
+    local z_crc_t crc_word OF((z_word_t data));
+    local z_word_t crc_word_big OF((z_word_t data));
 #endif
 
 #if defined(W) && (!defined(ARMCRC32) || defined(DYNAMIC_CRC_TABLE))
@@ -630,7 +639,7 @@ unsigned long ZEXPORT crc32_z(crc, buf, len)
 #endif /* DYNAMIC_CRC_TABLE */
 
     /* Pre-condition the CRC */
-    crc ^= 0xffffffff;
+    crc = (~crc) & 0xffffffff;
 
     /* Compute the CRC up to a word boundary. */
     while (len && ((z_size_t)buf & 7) != 0) {
@@ -645,8 +654,8 @@ unsigned long ZEXPORT crc32_z(crc, buf, len)
     len &= 7;
 
     /* Do three interleaved CRCs to realize the throughput of one crc32x
-       instruction per cycle. Each CRC is calcuated on Z_BATCH words. The three
-       CRCs are combined into a single CRC after each set of batches. */
+       instruction per cycle. Each CRC is calculated on Z_BATCH words. The
+       three CRCs are combined into a single CRC after each set of batches. */
     while (num >= 3 * Z_BATCH) {
         crc1 = 0;
         crc2 = 0;
@@ -749,7 +758,7 @@ unsigned long ZEXPORT crc32_z(crc, buf, len)
 #endif /* DYNAMIC_CRC_TABLE */
 
     /* Pre-condition the CRC */
-    crc ^= 0xffffffff;
+    crc = (~crc) & 0xffffffff;
 
 #ifdef W
 
@@ -1077,7 +1086,7 @@ uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
 #ifdef DYNAMIC_CRC_TABLE
     once(&made, make_crc_table);
 #endif /* DYNAMIC_CRC_TABLE */
-    return multmodp(x2nmodp(len2, 3), crc1) ^ crc2;
+    return multmodp(x2nmodp(len2, 3), crc1) ^ (crc2 & 0xffffffff);
 }
 
 /* ========================================================================= */
@@ -1086,7 +1095,7 @@ uLong ZEXPORT crc32_combine(crc1, crc2, len2)
     uLong crc2;
     z_off_t len2;
 {
-    return crc32_combine64(crc1, crc2, len2);
+    return crc32_combine64(crc1, crc2, (z_off64_t)len2);
 }
 
 /* ========================================================================= */
@@ -1103,14 +1112,14 @@ uLong ZEXPORT crc32_combine_gen64(len2)
 uLong ZEXPORT crc32_combine_gen(len2)
     z_off_t len2;
 {
-    return crc32_combine_gen64(len2);
+    return crc32_combine_gen64((z_off64_t)len2);
 }
 
 /* ========================================================================= */
-uLong crc32_combine_op(crc1, crc2, op)
+uLong ZEXPORT crc32_combine_op(crc1, crc2, op)
     uLong crc1;
     uLong crc2;
     uLong op;
 {
-    return multmodp(op, crc1) ^ crc2;
+    return multmodp(op, crc1) ^ (crc2 & 0xffffffff);
 }

libs/zlib/deflate.h

@@ -329,8 +329,8 @@ void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
 # define _tr_tally_dist(s, distance, length, flush) \
   { uch len = (uch)(length); \
     ush dist = (ush)(distance); \
-    s->sym_buf[s->sym_next++] = dist; \
-    s->sym_buf[s->sym_next++] = dist >> 8; \
+    s->sym_buf[s->sym_next++] = (uch)dist; \
+    s->sym_buf[s->sym_next++] = (uch)(dist >> 8); \
     s->sym_buf[s->sym_next++] = len; \
     dist--; \
     s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \

libs/zlib/inflate.c

@@ -168,6 +168,8 @@ int windowBits;
 
     /* extract wrap request from windowBits parameter */
     if (windowBits < 0) {
+        if (windowBits < -15)
+            return Z_STREAM_ERROR;
         wrap = 0;
         windowBits = -windowBits;
     }
@@ -764,8 +766,9 @@ int flush;
                 if (copy > have) copy = have;
                 if (copy) {
                     if (state->head != Z_NULL &&
-                        state->head->extra != Z_NULL) {
-                        len = state->head->extra_len - state->length;
+                        state->head->extra != Z_NULL &&
+                        (len = state->head->extra_len - state->length) <
+                            state->head->extra_max) {
                         zmemcpy(state->head->extra + len, next,
                                 len + copy > state->head->extra_max ?
                                 state->head->extra_max - len : copy);

libs/zlib/inftrees.c

@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.12 Copyright 1995-2022 Mark Adler ";
+   " inflate 1.2.13 Copyright 1995-2022 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -62,7 +62,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 199, 202};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 194, 65};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,

libs/zlib/inftrees.h

@@ -38,7 +38,7 @@ typedef struct {
 /* Maximum size of the dynamic table.  The maximum number of code structures is
    1444, which is the sum of 852 for literal/length codes and 592 for distance
    codes.  These values were found by exhaustive searches using the program
-   examples/enough.c found in the zlib distribtution.  The arguments to that
+   examples/enough.c found in the zlib distribution.  The arguments to that
    program are the number of symbols, the initial root table size, and the
    maximum bit length of a code.  "enough 286 9 15" for literal/length codes
    returns returns 852, and "enough 30 6 15" for distance codes returns 592.

libs/zlib/zconf.h

@@ -38,6 +38,9 @@
 #  define crc32                 z_crc32
 #  define crc32_combine         z_crc32_combine
 #  define crc32_combine64       z_crc32_combine64
+#  define crc32_combine_gen     z_crc32_combine_gen
+#  define crc32_combine_gen64   z_crc32_combine_gen64
+#  define crc32_combine_op      z_crc32_combine_op
 #  define crc32_z               z_crc32_z
 #  define deflate               z_deflate
 #  define deflateBound          z_deflateBound
@@ -349,6 +352,9 @@
 #    ifdef FAR
 #      undef FAR
 #    endif
+#    ifndef WIN32_LEAN_AND_MEAN
+#      define WIN32_LEAN_AND_MEAN
+#    endif
 #    include <windows.h>
      /* No need for _export, use ZLIB.DEF instead. */
      /* For complete Windows compatibility, use WINAPI, not __stdcall. */
@@ -467,11 +473,18 @@ typedef uLong FAR uLongf;
 #  undef _LARGEFILE64_SOURCE
 #endif
 
-#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
-#  define Z_HAVE_UNISTD_H
+#ifndef Z_HAVE_UNISTD_H
+#  ifdef __WATCOMC__
+#    define Z_HAVE_UNISTD_H
+#  endif
+#endif
+#ifndef Z_HAVE_UNISTD_H
+#  if defined(_LARGEFILE64_SOURCE) && !defined(_WIN32)
+#    define Z_HAVE_UNISTD_H
+#  endif
 #endif
 #ifndef Z_SOLO
-#  if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#  if defined(Z_HAVE_UNISTD_H)
 #    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
 #    ifdef VMS
 #      include <unixio.h>       /* for off_t */

libs/zlib/zlib.h

 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.12, March 11th, 2022
+  version 1.2.13, October 13th, 2022
 
   Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
 
@@ -37,11 +37,11 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.12"
-#define ZLIB_VERNUM 0x12c0
+#define ZLIB_VERSION "1.2.13"
+#define ZLIB_VERNUM 0x12d0
 #define ZLIB_VER_MAJOR 1
 #define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 12
+#define ZLIB_VER_REVISION 13
 #define ZLIB_VER_SUBREVISION 0
 
 /*
@@ -276,7 +276,7 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
   == 0), or after each call of deflate().  If deflate returns Z_OK and with
   zero avail_out, it must be called again after making room in the output
   buffer because there might be more output pending. See deflatePending(),
-  which can be used if desired to determine whether or not there is more ouput
+  which can be used if desired to determine whether or not there is more output
   in that case.
 
     Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
@@ -660,7 +660,7 @@ ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
    to dictionary.  dictionary must have enough space, where 32768 bytes is
    always enough.  If deflateGetDictionary() is called with dictionary equal to
    Z_NULL, then only the dictionary length is returned, and nothing is copied.
-   Similary, if dictLength is Z_NULL, then it is not set.
+   Similarly, if dictLength is Z_NULL, then it is not set.
 
      deflateGetDictionary() may return a length less than the window size, even
    when more than the window size in input has been provided. It may return up
@@ -915,7 +915,7 @@ ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
    to dictionary.  dictionary must have enough space, where 32768 bytes is
    always enough.  If inflateGetDictionary() is called with dictionary equal to
    Z_NULL, then only the dictionary length is returned, and nothing is copied.
-   Similary, if dictLength is Z_NULL, then it is not set.
+   Similarly, if dictLength is Z_NULL, then it is not set.
 
      inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
    stream state is inconsistent.
@@ -1437,12 +1437,12 @@ ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
 
      In the event that the end of file is reached and only a partial item is
    available at the end, i.e. the remaining uncompressed data length is not a
-   multiple of size, then the final partial item is nevetheless read into buf
+   multiple of size, then the final partial item is nevertheless read into buf
    and the end-of-file flag is set.  The length of the partial item read is not
    provided, but could be inferred from the result of gztell().  This behavior
    is the same as the behavior of fread() implementations in common libraries,
    but it prevents the direct use of gzfread() to read a concurrently written
-   file, reseting and retrying on end-of-file, when size is not 1.
+   file, resetting and retrying on end-of-file, when size is not 1.
 */
 
 ZEXTERN int ZEXPORT gzwrite OF((gzFile file, voidpc buf, unsigned len));
@@ -1913,7 +1913,7 @@ ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
 ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
 ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
 ZEXTERN int            ZEXPORT inflateValidate OF((z_streamp, int));
-ZEXTERN unsigned long  ZEXPORT inflateCodesUsed OF ((z_streamp));
+ZEXTERN unsigned long  ZEXPORT inflateCodesUsed OF((z_streamp));
 ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
 ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
 #if defined(_WIN32) && !defined(Z_SOLO)

libs/zlib/zutil.c

@@ -61,9 +61,11 @@ uLong ZEXPORT zlibCompileFlags()
 #ifdef ZLIB_DEBUG
     flags += 1 << 8;
 #endif
+    /*
 #if defined(ASMV) || defined(ASMINF)
     flags += 1 << 9;
 #endif
+     */
 #ifdef ZLIB_WINAPI
     flags += 1 << 10;
 #endif
@@ -119,7 +121,7 @@ uLong ZEXPORT zlibCompileFlags()
 #  endif
 int ZLIB_INTERNAL z_verbose = verbose;
 
-void ZLIB_INTERNAL z_error (m)
+void ZLIB_INTERNAL z_error(m)
     char *m;
 {
     fprintf(stderr, "%s\n", m);
@@ -214,7 +216,7 @@ local ptr_table table[MAX_PTR];
  * a protected system like OS/2. Use Microsoft C instead.
  */
 
-voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
+voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, unsigned items, unsigned size)
 {
     voidpf buf;
     ulg bsize = (ulg)items*size;
@@ -240,7 +242,7 @@ voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
     return buf;
 }
 
-void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr)
 {
     int n;
 
@@ -277,13 +279,13 @@ void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 #  define _hfree   hfree
 #endif
 
-voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
+voidpf ZLIB_INTERNAL zcalloc(voidpf opaque, uInt items, uInt size)
 {
     (void)opaque;
     return _halloc((long)items, size);
 }
 
-void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree(voidpf opaque, voidpf ptr)
 {
     (void)opaque;
     _hfree(ptr);
@@ -302,7 +304,7 @@ extern voidp  calloc OF((uInt items, uInt size));
 extern void   free   OF((voidpf ptr));
 #endif
 
-voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
+voidpf ZLIB_INTERNAL zcalloc(opaque, items, size)
     voidpf opaque;
     unsigned items;
     unsigned size;
@@ -312,7 +314,7 @@ voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
                               (voidpf)calloc(items, size);
 }
 
-void ZLIB_INTERNAL zcfree (opaque, ptr)
+void ZLIB_INTERNAL zcfree(opaque, ptr)
     voidpf opaque;
     voidpf ptr;
 {

libs/zlib/zutil.h

@@ -193,6 +193,7 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
     (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+    ZEXTERN uLong ZEXPORT crc32_combine_gen64 OF((z_off_t));
 #endif
 
         /* common defaults */