With this we break luks support for the old use/live/install.

live can be used also as an installer or rescue.
For altinst and rescue is nothing changes.

This font scales well on small screens.

This has no effect on the size of the squashfs, but does create
unexpected problems.

Broken and obsoleted by control sudowheel.
See: https://git.altlinux.org/tasks/archive/done/_315/323161/

Fix https://bugzilla.altlinux.org/40802

The image and the installed system may have kernels with different KFLAVOUR.

Command-line copy/paste utilities for Wayland.

kvm isn't universally available, let's at least mark it this way.

This one fixes the "cooler goes off during installation"
10.2rc problem on multi-CPU e8c2 motherboards that follows
misinitialization of sensor drivers (lacking i2c mux init
_before_ them) and subsequent misreading of zero degree
temperature for CPUs (would need no cooling if it was true).

See-also: mcst#8627
Suggested-by: mcst.ru folks
Tested-by: elbrus.ru folks

It only makes sense on engineering samples of .404 board,
and 201-PC is .480 with only a single 4X PCIe gen3 slot
that needs riser to get a reasonable videocard connected
(manual multiseat setup is a minor hurdle it seems).

We don't do ship vivante drivers since p9_e2k
as those behaved erratically with gtk+3 at least
(and were a major PITA to handle in the first place,
and nobody asked in the end: folks just needed 2D+Xv);
so no sense to bring extra noise into installation.

See the .318-01 related story in a nearby pkg.in commit.

The reason is that there were several batches of
4-port .318-01 based 801-PC systems shipped specifically
as multiseat ones (with two RX570 or three simpler GPUs),
and it's more reasonable to provide out-of-box support
for those in a new release instead of having to resort
to manual setups with alterator-multiseat, messing with
the installer-provided configuration by hand or giving up
(or, well, building a sideline installer images with
custom udev-conf packages).

e2kv4 with mga2  is e1cp (Elbrus-1C+);
e2kv6 with mga25 is e2c3 (Elbrus-2C3).

xorg driver is the same.

e1cp and e2c3 have tricky GPU driver modules that can misinit
given the lack of other modules they don't directly depend on;
let's provide softdep lists so that the prereqs do get loaded.

See-also: mcst#8098

The problem is with indirect module initialization dependencies
(the infamous "Driver probe function unexpectedly returned 256"
error when loading the module from initrd and not full rootfs);
let's provide modprobe with a hint.
Suggested-by: Vitaly Chikunov <vt@altlinux.org>
See-also: mcst#8089
See-also: mcst#8392

...accordingly to the package getting renamed.

201-PC has been developed using .404 motherboards
(IIRC using the two middle PCIe slots for GPUs);
1601-PC one has been done with .466 motherboard
by sciberia.io guys who have outrun me at that!

The packages might need more tweaks and PCIe slot
specifics in documentation but the configurations
were taken from real systems.

It's an artificial name albeit my workstation (nee build server)
is dubbed e1601 at work, but it's still beta than nothin'.