Initial commit

ximpershot

+#!/bin/bash
+
+CLIPBOARD=0
+RAW=0
+
+print_error() {
+    printf "\033[1;31m%s\033[0m\n" "$1"
+    exit 1
+}
+
+print_green() {
+    printf "\033[1;32m%s\033[0m\n" "$1"
+}
+
+print_yellow() {
+    printf "\033[1;33m%s\033[0m\n" "$1"
+}
+
+print_blue() {
+    printf "\033[1;34m%s\033[0m\n" "$1"
+}
+
+print_red() {
+    printf "\033[1;31m%s\033[0m\n" "$1"
+}
+
+print_white() {
+    printf "\033[0m%s\033[0m\n" "$1"
+}
+
+print_help() {
+	print_white ""
+	print_green  "Использование: $(basename $0) [опции]"
+	print_white  ""
+	print_white  "  -h | --help      Вывод этой справки"
+	print_white  ""
+	print_blue   "Режим:"
+	print_white  "  -m | --mode      Режим создания скриншота"
+	print_yellow "                    output - выбрать монитор"
+	print_yellow "                    window - выбрать окно"
+	print_yellow "                    region - выбрать область"
+	print_blue   "Сохраниние:"
+	print_white  "  -o | --output    Сохранить изображение в файл"
+	print_white  "                   Используйте - для вывода в stdout"
+	print_white  "  -c | --copy      Сохранить в буфер обмена" 
+	print_blue   "Способ обработки:"
+	print_white  "       --swappy    Вызвать swappy"
+	print_white  "       --satty     Вызвать satty"
+	print_white  "       -- [*]      Перенаправить вывод в другую команду"
+	print_red    "                    При использовании -- не учитываются флаги секции 'Сохранение'"
+	exit 0
+}
+
+trim() {
+    local geometry="${1}"
+    local xy_str=$(echo "${geometry}" | cut -d' ' -f1)
+    local wh_str=$(echo "${geometry}" | cut -d' ' -f2)
+    local x=`echo "${xy_str}" | cut -d',' -f1`
+    local y=`echo "${xy_str}" | cut -d',' -f2`
+    local width=`echo "${wh_str}" | cut -dx -f1`
+    local height=`echo "${wh_str}" | cut -dx -f2`
+
+    local max_width=`hyprctl monitors -j | jq -r '[.[] | if (.transform % 2 == 0) then (.x + .width) else (.x + .height) end] | max'`
+    local max_height=`hyprctl monitors -j | jq -r '[.[] | if (.transform % 2 == 0) then (.y + .height) else (.y + .width) end] | max'`
+
+    local min_x=`hyprctl monitors -j | jq -r '[.[] | (.x)] | min'`
+    local min_y=`hyprctl monitors -j | jq -r '[.[] | (.y)] | min'`
+
+    local cropped_x=$x
+    local cropped_y=$y
+    local cropped_width=$width
+    local cropped_height=$height
+
+    if ((x + width > max_width)); then
+        cropped_width=$((max_width - x))
+    fi
+    if ((y + height > max_height)); then
+        cropped_height=$((max_height - y))
+    fi
+
+    if ((x < min_x)); then
+        cropped_x="$min_x"
+        cropped_width=$((cropped_width + x - min_x))
+    fi
+    if ((y < min_y)); then
+        cropped_y="$min_y"
+        cropped_height=$((cropped_height + y - min_y))
+    fi
+
+    local cropped=`printf "%s,%s %sx%s\n" \
+        "${cropped_x}" "${cropped_y}" \
+        "${cropped_width}" "${cropped_height}"`
+    echo ${cropped}
+}
+
+process_screenshot() {
+    local output_file="$1"
+    local app="$2"
+    local geometry="$3"
+
+    if [ -z "$output_file" ] && [ ! "$COPY" ]; then
+        print_error "OUTPUT не указан"
+        return 1
+    fi
+
+    case "$app" in
+        "")
+            if [ "$output_file" = "-" ]; then
+                wayshot -s "${geometry}" --stdout
+            else
+                wayshot -s "${geometry}" -f "$output_file"
+            fi
+            if [ "$COPY" == "true" ]; then
+				wayshot -s "${geometry}" --stdout | wl-copy
+            fi
+            ;;
+        swappy|satty)
+            if [ "$output_file" = "-" ]; then
+                wayshot -s "${geometry}" --stdout | "$app" -f - -o -
+            else
+                wayshot -s "${geometry}" --stdout | "$app" -f - -o "${output_file:-}"
+            fi
+            ;;
+    esac
+}
+
+save_geometry() {
+	local geometry="${1}"
+
+	if [ -n "$OUTPUT" ] && [ "$OUTPUT" != "-" ]; then
+	    mkdir -p $(dirname ${OUTPUT})
+	fi
+	
+	if [ "$COMMAND" ]; then
+		wayshot -s "${geometry}" --stdout | $COMMAND
+		return
+	fi
+	    
+	if [ -z "$OUTPUT_APP" ]; then
+	    process_screenshot "$OUTPUT" "" "$geometry"
+	else
+	    process_screenshot "$OUTPUT" "$OUTPUT_APP" "$geometry"
+	fi
+}
+
+begin_grab() {
+    case $1 in
+        output)
+			local geometry=`get_output`
+            ;;
+        region)
+            local geometry=`get_region`
+            ;;
+        window)
+        	local geometry=`get_window`
+	    geometry=`trim "${geometry}"`
+            ;;
+    esac
+    save_geometry "${geometry}"
+}
+
+get_output() {
+    slurp -or
+}
+
+get_region() {
+    slurp -d
+}
+
+get_window() {
+    local monitors=`hyprctl -j monitors`
+    local clients=`hyprctl -j clients | jq -r '[.[] | select(.workspace.id | contains('$(echo $monitors | jq -r 'map(.activeWorkspace.id) | join(",")')'))]'`
+    local boxes="$(echo $clients | jq -r '.[] | "\(.at[0]),\(.at[1]) \(.size[0])x\(.size[1]) \(.title)"' | cut -f1,2 -d' ')"
+    slurp -r <<< "$boxes"
+}
+
+OPTS=$(getopt -o ho:m:c --long help,copy,swappy,satty -- "$@") || {
+    print_error "Ошибка обработки опций."
+}
+eval set -- "$OPTS"
+
+while true; do
+    case "$1" in
+        -h|--help)
+            print_help
+            ;;
+        -o | --output)
+            OUTPUT=$2
+            shift 2
+            ;;
+		-m | --mode)
+            MODE=$2
+            shift 2
+            ;;
+		-c | --copy)
+            COPY=true
+            shift
+            ;;
+		--swappy)
+            OUTPUT_APP=swappy
+            shift
+            ;;
+        --satty)
+        	OUTPUT_APP=satty
+        	shift
+        	;;
+		--)
+			shift
+       		COMMAND=${@}
+       		break
+       		;;
+        "")
+            shift
+            ;;
+       	*)
+       		print_error "Неверная опция: $1"
+       		;;
+       	
+    esac
+done
+
+begin_grab $MODE