Added rEFInd, EFI shell and SB stuff.

Maybe it's worth moving to the kernel feature as well.

The various *8168 and friends among kernel modules
have finally been pushed into a designated target
so that RM doesn't have to care which particular
additional ethernet modules are available in this
particular branch and kernel.

Tweak distros as appropriate.

NB: *maybe* this is required by distro/.base either.

acpi_call is used far too often when dealing with the newer
portable x86 hardware, we're better off including it when
it's available.

regular.mk adjusted appropriately.

Let's make CPU microcode an explicit target, it isn't
required at every host where firmware-linux is.

Adjusted its use accordingly.

Richard and Theo would probably roll their eyes at this point
but the unfortunate reality is that wireless hardware is very
much dependent on firmware being explicitly provided; so here
it is.

rtl8192 kernel module added since it's present in t6/branch
at least.

This change mostly concerns with making icewm flavour
the lean one again.

The goal is to widen the dynamic range of regular image features:
icewm is not a desktop thus can bear withouth systemd-logind
even if a bunch of network-managing-media-mounting crap has been
rigged to depend on it, and ALT domain client should be included
in most builds for convenient testing in SMB environments but can
stay out of this minimal and "different" image.

It also receives the "un-def" kernel flavour (3.8.0 as of today)
which might benefit from the more available testing facility too.

Its branding is also simplified, plain syslinux menu is fine;
in similar vein, refind feature is flipped from icewm-only to
all-but-icewm set of images with its state being good enough
as of refind 0.6.7 and mkimage 0.2.7.

It was gdm2.20's feature that requires further setup
to actually function; thanks aen@ for explanations.

ALT domain client regular.mk: added settime-rfc867 to kde4

Seems like this belongs to domain-client pkglist though...

There were a few packages disappearing or changing
along the autoimport path, let's clean up the cruft.

mate-conf-gtk is now gone, so removed either.

mate-default pulls in mate-minimal and both of them
require packages which are also specified in this
pkglist; thus the pkglist should be pruned to avoid
double work and splits like "mate-vfs is dropped
from 1.5 package set, mate-default is adjusted but
the pkglist references the now-missing package".

It happens when there are no separate arch/noarch subrepositories
but everything is dumped into a single directory like in installer
or live-builder environment (at least as of today).

Relevant for 0.5.2-alt2+, ping me if a backport is needed.

razorqt-0.5.2 out there already, zerg@ reminded of the greeter,
maybe it's finally time to get the pieces together.

- works with make-initrd 0.8.1+ (see #28578)

It was removing autodetection setting completely
thus implicitly setting it to the default "all"
with make-initrd-0.8.1+; just set it to be empty.

Thanks legion@ and boyarsh@; see also #28578.

- live fixes/tweaks galore

Added use/live/net-eth so that autoconfigured images
still work in predictable manner.

May those breaking trivial cases walk with zillion of
cdrom, modem, ethernet etc device nodes all around them!

The inobvious issue is that while lxde-settings
is required by lxde-common and provided by both
lxde-settings-{altlinux,upstream}, we can't just
add the needed one via PACKAGES since the LISTS'
deps are expanded already with -upstream taking
lexicographical precedence.

This might become more serious if/when there are
several useful packages, -upstream isn't AFAIK
(thanks gns@ for explanation).

A tiny small utility
that gives us the ability
to eject that noisy disc.

Citing the initial comment: "lxterminal is reportedly
sub-par (gns@) but official (aen@)"; the functionality
PoV finally won.

Terminus fonts added to account for presets.

See also #28567.

As per lav@'s proposition at LVEE.

livecd-webkiosk used to support firefox only but has been changed
to do chromium either; now we need to be more specific.

led-ws doesn't work for me with make-initrd 0.8.0-alt1 yet...

UEFI systems encountered should work too.

Its support is quite mature and practically useful by now.
Let's also add a convenient alias.

It was bailing out due to the grossly unneeded -e;
thanks dans@ for bringing my attention to this
right at LVEE 2013 Winter.

sudo added by popular demand, see also this subthread:
http://lists.altlinux.org/pipermail/sisyphus/2013-February/359726.html

os-prober added on dubrsl@'s request (#altlinux)
after having a look at m-p-d as well.

Vladimir Didenko suggested including fontconfig-infinality
into regular-cinnamon.iso, see this subthread:
http://lists.altlinux.org/pipermail/sisyphus/2013-February/359724.html

Added fvwm flavour specially for perestoronin from da LOR.

As if it wasn't enough,
- added UEFI support to desktop/,live-desktop intermediate target;
- added live installation capability to desktop/.livecd-install;
- added "net-eth" subfeature to get good ol' eth0 insteal of enp0s3;
- dropped use/x11/autologin as live subprofile sets up
  a supported DM for automatic login anyways.

It's becoming a relatively popular request ;-)

It'd be better for this commit to appear before 0.9.7
(and clobber the original one) but at least the added
functionality has been tested; time to generalize it.

- going nightly

The issue has shown up in regular-*-20130207: /etc/resolv.conf
would suddenly be empty upon successful bootup in virtualbox
with a single DHCP configurable ethernet.

dmesg has some trouble signs:

  aufs au_lkup_neg:267:kworker/0:2[998]:
  I/O Error, resolv.conf should be negative on b0

sem@ tells something like that has been seen before in a different
configuration (multiple aufs overlays with /etc/ and /var sitting
in different ones resulting in broken hardlinks); rescue boot with
a test "echo > /etc/resolv.conf" yields an I/O error either.

The patch is loosely based upon livecd-net-eth and
m-p-d::profiles/live/image-scripts.d/init3-{network,resolve}.

See also #28484 for the (still ongoing) discussion.

enp0s3 is quite inferior to eth0 in terms of usability
even if it might be more convenient for the machine{,ry}.

Let's stick with what works here in ALT Linux (see #28484).

Once upon a time the first and only ethernet interface
on a Linux system used to be known under the name of eth0;
but years passed and the systemd shadow has drawn closer
even to the seemingly remote areas like interface names.

In short, it might get named e.g. enp0s3 (a more human
friendly name of course) and the exact name is to be
figured out in runtime as well.

Sigh.

See #28390, #28473 and #28471; thanks zerg@ for reminder.